08-14 WRX

CONFIRMED FITMENT FOR 2015-2021 WRX / STI
The Password:JDM dry carbon fiber battery cover for the 2008-2021 Subaru WRX STi uses the factory mounting hardware to cover your battery. This cover keeps the top of the battery from looking dusty with debris whenever you pop the hood. This will fit both normal WRX and STi models.

Please Note: We have seen issues in the past with aftermarket intercoolers causing clearance issues for this battery cover.

Warning: When installing battery covers please ensure your battery has a terminal cover, Carbon Fiber is a conductive material. If the terminal post is not covered the battery cover could melt causing damage to the product and/or your vehicle. Tecnocraft Composites does not cover damaged items due to customer negligence.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Add that last finishing touch to your engine bay with these all new Password:JDM fender washers! Offered in anodized black, blue, gold, purple, red, gunmetal, silver, green, pink and orange these fender washers feature the Password:JDM Kenji logo. All Password:JDM fender washers are constructed from aircraft grade aluminum and are matched up with long lasting stainless steel bolts.

The Password:JDM Fender Washer Kits include 6Mx20 stainless steel bolts. The fender washers will fit any 10mm bolt hole under the hood of your Honda. The 6Mx20 bolts is recommended for all parts under your hood such as fenders, headlights, bumpers, etc.

Please note that each pack comes with 5 washers and bolts

**Only Authorized Seller For Password:JDM**


Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

CONFIRMED FITMENT FOR 2015-2021 WRX / STI
Part of modding your car is making it look good and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM dry carbon fiber fuse box over-cover for the 2008-2021 Subaru WRX adheres to your stock fuse box cover and will help clean up the look of your engine bay making your engine stand out, while adding a much-needed accent to the scene.

Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it.

Note:The Password:JDM Dry Carbon Fiber Fuse Box Over Cover fits over the factory part and is adhered with double side tape. Will fit both normal WRX and STi models.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

CONFIRMED FITMENT FOR 2015+ WRX / STI
The Password:JDM Dry Carbon Fiber Gurney Flap / Wickerbill is a short lip that protrudes upward from the upper trailing edge of the 2008-2020 Subaru WRX STI Sedan's factory spoiler / Password:JDM Dry Carbon Fiber Elevated Rear Spoiler. It’s used to enhance the wing’s down-force characteristics by separating the airflow on the back side of the wing, primarily that which comes over the top of the wing. The result creates a localized high-pressure zone on the top side of the wing generating enforced.

When used in conjunction with a functional front splitter/canards, you will be able to enhance the overall aerodynamic characteristics of your Subaru WRX STi Sedan's

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

CONFIRMED FITMENT FOR 2015+ WRX / STI
The Password:JDM Dry Carbon Fiber Suspension Caps for the 2008+ Subaru WRX will clean up the look of your engine bay! Like all of our Dry Carbon parts we manufacture, this frame shield has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this engine cover will always look & function as good as the day you bought it!

Note: Sold as a pair

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Revitalize your PasswordJDM part with a fresh, new badge.

The Password:JDM Dry Carbon Fiber ABS/Power Steering Shield 2008-2014 Subaru WRX / STi will clean up the look of your engine bay! Our ABS/Power Steering Cover mounts using the factory mounting points. This will fit normal WRX and STi models.

Like all of our Dry Carbon Kevlar parts we manufacture, this pulley cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this cover will always look & function as good as the day you bought it!

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Password:JDM's Dry Carbon Fiber Pulley Cover for your WRX or STi the perfect addition to any engine bay. Whether you're looking to just accessorize or you're trying to match any exterior carbon fiber the Pulley Cover is the item that sits upfront in the middle. It goes well with complementing our Cooling Plates as well!  

Like all of our Dry Carbon parts we manufacture, this pulley cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this cover will always look & function as good as the day you bought it!

Please note this item will not fit the 15+ WRX due to the FA engine. It will only fit the 08-14 WRX and 08-21 STi.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

You trying to rep our logo at your next meet? Make sure to grab one of our License Plate Frames! This frame has our name on it, so people know you got some Carbon Fiber goods under the hood when you pull up. Easy to install (we hope you can do this), and instant flex points. 

Care instructions: Wash your car so you don't get a brown font on the Frame, and you'll be good to go.

Disclaimer: Your hand will become tired from pointing to your license plate frame constantly whenever people ask "Yo, where did you get those Carbon Fiber parts?". Please ask a medical professional for a wrist brace or splint. 

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your 2008-2014 Subaru WRX's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Fiber Cooling Plate for the 08-14 Subaru WRX's to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving. This will fit normal WRX and STi models.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon versions.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Tecnocraft Dry Carbon Fiber Universal Hood Vents, serve several, purpose like improved cooling by allowing hot air to exit the engine bay more efficiently.  Aerodynamics by reduced air pressure buildup in the engine compartment.

Dimensions: 

• Overall Length: (17.25in)
• Overall Width:(4.75in)
• Approximate Height: (2in)

NOTE: These vents do not include hardware and are not pre-drilled. These vents are sold as a pair.

The Password:JDM Fuse Box Over-Cover for the 2008-2021 WRX/STi is a easy install engine bay mod that adheres to your fuse box cover with double sided tape. This item sits right next to the battery and is an effective item to start off your engine bay mod path. This Fuse Box Over-Cover paired with the Battery Cover allows you to start at the bottom right of the driver side and leaves it with a nice Carbon Fiber touch. 

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Disclaimer: Tecnocraft Composites and Password:JDM's B Stock items are items that didn't quite pass our quality standards. The items on the B Stock page are fully functional and great products for someone who doesn't mind a small imperfection for a discounted price. Tecnocraft does not accept returns on B stock items. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

CONFIRMED FITMENT FOR 2015-2021 WRX / STI
The Password:JDM dry carbon fiber battery cover for the 2008-2021 Subaru WRX STi uses the factory mounting hardware to cover your battery. This cover keeps the top of the battery from looking dusty with debris whenever you pop the hood. This will fit both normal WRX and STi models.

Please Note: We have seen issues in the past with aftermarket intercoolers causing clearance issues for this battery cover.

Warning: When installing battery covers please ensure your battery has a terminal cover, Carbon Fiber is a conductive material. If the terminal post is not covered the battery cover could melt causing damage to the product and/or your vehicle. Tecnocraft Composites does not cover damaged items due to customer negligence.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Protect your rear bumper paint from soot buildup while adding an aggressive look with the Password:JDM Dry Carbon Fiber Exhaust Shrouds for the 2011-2014 Subaru WRX STi Sedan. Includes both driver and passenger side shrouds. Handcrafted in-house, using the highest quality dry carbon composites, the WRX STi exhaust shrouds will form perfectly to your factory bumper. These can be installed using either rivets, 3m tape, or silicone adhesive.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

PasswordJDM Limited Re-Release License Plate Frame – Back by Popular Demand!
Missed out the first time? Now’s your chance! The PasswordJDM License Plate Frame is back for a limited re-release, giving die-hard JDM enthusiasts another shot at securing this iconic accessory. 

Keep cool air flowing to your factory air box with the Password:JDM Dry Carbon Fiber Intake Snorkel for the 2010-2014 Subaru WRX / STi. Using a unique, organic flowing design, our intake snorkel will set off the look of your engine bay, while retaining OEM functionality. Bolt on installation using factory mounting holes.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Upper Canards for the 2012-2014 Subaru WRX STi will generate downforce on the front end to help stabilize your vehicle at high speeds. With the use of a functional front splitter, you can balance the amount of downforce required as per your setup and application per racetrack.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand-crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Lower Canards for the 2012-2014 Subaru WRX STi will generate down-force on the front end to help stabilize your vehicle at high speeds. With the use of a functional front splitter, you can balance the amount of down-force required as per your setup and application per racetrack.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand-crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Gurney Flap / Wickerbill is a short lip that protrudes upward from the upper trailing edge of the 2008-2014 Subaru WRX Hatchback's factory spoiler. It’s used to enhance the wing’s down-force characteristics by separating the airflow on the back side of the wing, primarily that which comes over the top of the wing. The result creates a localized high-pressure zone on the top side of the wing generating down-force.

When used in conjunction with a functional front splitter and canards, you will be able to enhance the overall aerodynamic characteristics of your Subaru WRX Hatchback.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon 2pc Front Splitter Type B for the 2008-2014 Subaru WRX STi an aggressive look and gives a wider stance while emphasizing the lines of the front fascia...These 2-piece kits are fabricated with only the best carbon composites. If you are looking to add a complete front splitter you will also need to middle panel which you can find here.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Combine this Password:JDM Dry Carbon Front Splitter Center Panel for the 2008-2014 Subaru WRX STi with our 2pc side panels for a full 3pc set that gives an aggressive look and wider stance while emphasizing the lines of the front fascia...These kits are fabricated with only the best carbon composites.

 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Engine Cover for the 2008 - 2014 Subaru WRX. By using an organic flowing design, our carbon engine cover will give your bay a very unique look unmatched by any other product on the market. Please note that this fits only the WRX (non-STi) engine.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

CONFIRMED FITMENT FOR 2015+ WRX / STI
The Password:JDM Dry Carbon Fiber Suspension Caps for the 2008+ Subaru WRX will clean up the look of your engine bay! Like all of our Dry Carbon parts we manufacture, this frame shield has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this engine cover will always look & function as good as the day you bought it!

Note: Sold as a pair

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your 2008-2014 Subaru WRX's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Fiber Cooling Plate for the 08-14 Subaru WRX's to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving. This will fit normal WRX and STi models.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Disclaimer: Tecnocraft Composites and Password:JDM's B Stock items are items that didn't quite pass our quality standards. The items on the B Stock page are fully functional and great products for someone who doesn't mind a small imperfection for a discounted price. Tecnocraft does not accept returns on B stock items. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. 

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Redirecting airflow under your car's hood provides notable benefits. As air moves through the front grill and a section of the front bumper, it passes through the radiator and gets confined beneath the hood. This retain heat in the engine bay and also contributes to aerodynamics lift.

Overall Size: 21x.5” x 23.5”

Keep cool air flowing to your factory air box with the Password:JDM Dry Carbon Kevlar Intake Snorkel for the 2010-2014 Subaru WRX / STi. Using a unique, organic flowing design, our intake snorkel will set off the look of your engine bay, while retaining OEM functionality. Bolt on installation using factory mounting holes.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Rear Diffuser Winglets for the 2011-2014 Subaru WRX STi Sean adds an aggressive look and gives a wider stance while emphasizing the lines of the rear bumper...These 2-piece kits are fabricated with only the best carbon composites.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

CONFIRMED FITMENT FOR 2015+ WRX / STI
The Password:JDM Dry Carbon Fiber Suspension Caps for the 2008+ Subaru WRX will clean up the look of your engine bay! Like all of our Dry Carbon parts we manufacture, this frame shield has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this engine cover will always look & function as good as the day you bought it!

Note: Sold as a pair

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Engine Cover for the 2008 - 2014 Subaru WRX. By using an organic flowing design, our carbon engine cover will give your bay a very unique look unmatched by any other product on the market. Please note that this fits only the WRX (non-STi) engine.

Like all of our Dry Carbon Fiber parts we manufacture, this engine cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this cover will always look & function as good as the day you bought it!

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your 2008-2014 Subaru WRX's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Kevlar Cooling Plate for the 08-14 Subaru WRX's to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving. This will fit normal WRX and STi models.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, but you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon version.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Kevlar Upper Canards for the 2012-2014 Subaru WRX STi will generate down-force on the front end to help stabilize your vehicle at high speeds. With the use of a functional front splitter, you can balance the amount of down-force required as per your setup and application per racetrack.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand-crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Kevlar Lower Canards for the 2012-2014 Subaru WRX STi will generate downforce on the front end to help stabilize your vehicle at high speeds. With the use of a functional front splitter, you can balance the amount of downforce required as per your setup and application per racetrack.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Enhance your 2008-2014 Subaru WRX STi's look with the Password:JDM Dry Carbon Fiber Side Splitters. Each Side Splitter kit is hand crafted in house, in the USA! Mounting hardware is included. Some drilling will be required to install the side skirts. Sold in pairs.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Engine Cover for the 2008 - 2014 Subaru WRX STi. By using an organic flowing design, our carbon engine cover will give your bay a very unique look unmatched by any other product on the market. Please note that this fits only the STi engine.

Like all of our Dry Carbon Fiber parts we manufacture, this engine cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this cover will always look & function as good as the day you bought it!

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.