Nissan

Add that last finishing touch to your engine bay with these all new Password:JDM fender washers! Offered in anodized black, blue, gold, purple, red, gunmetal, silver, green, pink and orange these fender washers feature the Password:JDM Kenji logo. All Password:JDM fender washers are constructed from aircraft grade aluminum and are matched up with long lasting stainless steel bolts.

The Password:JDM Fender Washer Kits include 6Mx20 stainless steel bolts. The fender washers will fit any 10mm bolt hole under the hood of your Honda. The 6Mx20 bolts is recommended for all parts under your hood such as fenders, headlights, bumpers, etc.

Please note that each pack comes with 5 washers and bolts

**Only Authorized Seller For Password:JDM**


Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

PasswordJDM Limited Re-Release License Plate Frame – Back by Popular Demand!
Missed out the first time? Now’s your chance! The PasswordJDM License Plate Frame is back for a limited re-release, giving die-hard JDM enthusiasts another shot at securing this iconic accessory. 

You trying to rep our logo at your next meet? Make sure to grab one of our License Plate Frames! This frame has our name on it, so people know you got some Carbon Fiber goods under the hood when you pull up. Easy to install (we hope you can do this), and instant flex points. 

Care instructions: Wash your car so you don't get a brown font on the Frame, and you'll be good to go.

Disclaimer: Your hand will become tired from pointing to your license plate frame constantly whenever people ask "Yo, where did you get those Carbon Fiber parts?". Please ask a medical professional for a wrist brace or splint. 

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Gurney Flap and Wickerbill is a short lip that protrudes upward from the upper trailing edge of the 2011-2021 Nissan R35 GTR's factory spoiler / Password:JDM Dry Carbon Fiber Elevated Rear Spoiler. It’s used to enhance the wing’s down-force characteristics by separating the airflow on the back side of the wing, primarily that which comes over the top of the wing. The result creates a localized high-pressure zone on the top side of the wing generating down-force.

When used in conjunction with a functional front splitter and canards, you will be able to enhance the overall aerodynamic characteristics of your GT-R.

Note: Our Gurney Flap is compatible with both the OEM spoiler and the Password:JDM Dry Carbon Fiber Elevated Rear Spoiler. This item does not fit on the Black Edition or Track Edition models. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 10-14 business days from the original purchase date. Due to high demand.

The Password:JDM Dry Carbon Fiber Cooling Plate is a mod that introduces onlookers to your engine bay. It sits right in front and goes around the hood latch, this piece does an amazing job of cleaning up the look of your car and still provides cooling gains. Your radiator needs constant airflow and gaps in the structure allow essential air to escape. We use a dry carbon fiber process, making our cooling plate almost twice as light as a clear coated carbon version.

NOTE: This cooling plate is not compatible with the NISMO model of the 370Z. The cooling plate will fit onto the vehicle, but there will be some slight rubbing between the hood and the cooling plate. Use at your own risk on the NISMO model.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Made of Dry Carbon Fiber, the Password:JDM Engine Compartment Covers fits perfectly. We redesigned these pieces, and they have a new "Z" shaped design on both sides. We also took the time to delete the access doors since removing these for access really only takes 30 secs. The initial installation takes only 5 mins and requires absolutely no cutting or drilling at all. These lightweight and rigid Password:JDM Dry Carbon Fiber Engine Compartment Covers will set off your engine bay perfectly!

- Perfect mod for the engine bay
- Dry CF construction
- Made in the USA
- Perfect fit and finish
- Easy install, no cutting or drilling required

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Tecnocraft Dry Carbon Fiber Universal Hood Vents, serve several, purpose like improved cooling by allowing hot air to exit the engine bay more efficiently.  Aerodynamics by reduced air pressure buildup in the engine compartment.

Dimensions: 

• Overall Length: (17.25in)
• Overall Width:(4.75in)
• Approximate Height: (2in)

NOTE: These vents do not include hardware and are not pre-drilled. These vents are sold as a pair.

It gets pretty hot under the GTR bonnet, so we made this Dry Carbon Fiber Radiator Cooling Panel to combat the heat. Besides reducing as much weight as possible from the OEM piece, it looks brilliant. By utilizing our exclusive epoxy resin, we can get a shiny finish through polishing, and not clear coating like the other guys. Clear coat adds unnecessary weight, so we left it out. If you look at the OEM rear under-tray diffuser, you’ll see even Nissan didn’t clear-coat their carbon piece for the same reason. This cooling plate also reduces turbulent air from going over the radiator and into the engine bay, so all the air is forced through the radiator maximizing its cooling effectiveness.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat

Planted Seat Brackets are laser cut from 3/16 inch thick steel and hand welded to ensure weld penetration for superior strength. They are finished with a black powder coat and applications are available for many vehicles

Handling Time:

• All orders will ship complete once all items are ready.
• Seat Brackets are made to order and will ship in 7-10 days or sooner.

DISCLAIMERS

• Seats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components.
• Many vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat. 
• Replacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work & which resistor to use.
• Professional installation is recommended.
• By completing a purchase you acknowledge reading the above disclaimers as well as our Disclaimer page.

Fitment on the Lip: 2009-2011, 2012-2020 without Nismo R35 GTR

If you haven't heard yet, the loud ass word on the street is that we've got the best damn GTR front lip out there - modular to many other add-ons (including dry carbon brake ducts!), aggressive, and absolutely 100% Dry Carbon MADE IN THE USA. Function meets form in Password:JDM's Ultimate Front Lip Spoiler for the Nissan GTR (R35).

For all the times you were worried about the roadkill you just ran over, the lip is constructed of honeycomb matrix on its underside, strength tested with baseball bats (no, seriously...), and is ready to survive your mad driving skills on and off the track. Keep the lip in tip-top shape and ask for the Lexan® skid pads and a set of extra washers to change out just in case ;).

And you're a self-proclaimed track star, right? Keep it COOL with the addition of the PWJDM Dry Carbon Brake Duct Mod (optional to the Ultimate Lip). These babies duct all the cool air you're scooping up at high speeds and funnel it directly onto your brake calipers, so why the hell not? Reduce brake fade the right way with these weekend add-ons!

Features:
- 100% Dry Carbon Construction - MADE IN THE USA
- HMR - Honeycomb Matrix Reinforced Construction
- Lightweight (8.5lbs bare) and SUPER STRONG...hell, we've taken a baseball bat to it!
- Dry Carbon Fin Strakes come STANDARD

Modular Additions:
- 100% Dry Carbon Reversible Center Extension (2x2 Carbon, Kevlar)
- PWJDM 100% Dry Carbon Brake Ducts (come in a pair, shave to fit offsets!)
- Lexan® Scrape Shield Skidplates and Extra Washers (for the times you got too damn low)

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

We take the Nissan GTR seriously and set a goal to reduce as much weight from it as possible with our family of dry carbon products. The Password:JDM Dry Carbon Fiber Intake Manifold Cover is 100% hand-made here in California with our top-quality carbon fiber and special UV resistant epoxy resin that gives strength and durability. This cover becomes the centerpiece of attention whenever you open your hood. Bring on the ooohhhhs and ahhhhhs by matching your GTR’s exotic performance with this exotic intake manifold cover.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Kevlar Cooling Plate is a mod that introduces onlookers to your engine bay. It sits right in front and goes around the hood latch, this piece does an amazing job of cleaning up the look of your car and still provides cooling gains. Your radiator needs constant airflow and gaps in the structure allow essential air to escape. We use a dry Carbon Kevlar process, making our cooling plate almost twice as light as a clear coated Carbon version.

NOTE: This cooling plate is not compatible with the NISMO model of the 370Z. The cooling plate will fit onto the vehicle, but there will be some slight rubbing between the hood and the cooling plate. Use at your own risk on the NISMO model.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Made of Dry Carbon Fiber, the Password:JDM Engine Compartment Covers fits perfectly. We redesigned these pieces, and they have a new "Z" shaped design on both sides. We also took the time to delete the access doors since removing these for access really only takes 30 secs. The initial installation takes only 5 mins and requires absolutely no cutting or drilling at all. This lightweight and rigid Password:JDM Dry Carbon Fiber Engine Compartment Covers will set off your engine bay perfectly!

- Perfect mod for the engine bay
- Dry CF construction
- Made in the USA
- Perfect fit and finish
- Easy install, no cutting or drilling required

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your Z34 2009+ Nissan 370Z operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Fiber Cooling Plate for the Z34 2009+ Nissan 370Z to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, but you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon version.

NOTE: This cooling plate is not compatible with the NISMO model of the 370Z. The cooling plate will fit onto the vehicle, but there will be some slight rubbing between the hood and the cooling plate. Use at your own risk on the NISMO model.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Disclaimer: Tecnocraft Composites and Password:JDM's B Stock items are items that didn't quite pass our quality standards. The items on the B Stock page are fully functional and great products for someone who doesn't mind a small imperfection for a discounted price. Tecnocraft does not accept returns on B stock items. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. 

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Take your Password:JDM Ultimate Front Lip setup to the next level with the Password:JDM Dry Carbon Reversible Center Extension — a purpose-built add-on designed to complement and complete the Ultimate Front Lip on the R35 Nissan GT-R.

Crafted from genuine carbon fiber, this center extension pairs seamlessly with the Ultimate Front Lip to fill in the center section for a more aggressive, cohesive front-end appearance. The reversible design gives you flexibility over how the carbon weave faces, so you can tailor the finish to match your build — whether you prefer a high-gloss statement or a subtle matte look.

Designed exclusively as a companion piece to the Password:JDM Ultimate Front Lip, this extension is the finishing touch that transforms a great front end into a complete, track-ready package.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

 

Replacement bumper extension for PasswordJDM Carbon Fiber Nissan R35 GTR Wide Fender.  

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

We take the Nissan GTR seriously and set a goal to reduce as much weight from it as possible with our family of dry carbon products. The Password:JDM Dry Carbon Fiber Intake Manifold Cover is 100% hand-made here in California with our top-quality carbon fiber and special UV resistant epoxy resin that gives strength and durability. This cover becomes the centerpiece of attention whenever you open your hood. Bring on the ooohhhhs and ahhhhhs by matching your GTR’s exotic performance with this exotic intake manifold cover.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

I love the GTR… you guys probably know that by now. It’s the ultimate supercar for the price… for 80k here in the States… what more could you ask for? I love the way it looks; I love the way it drives; I love the way it feels… what I don’t like is all that plastic. It takes the WOW factor away from the car. If you don’t agree with me, pop the hood and you’ll know what I am talking about. There is more plastic in this car than any other car in the same price range. PWJDM is about to change that! Introducing the PWJDM Dry CF GTR Engine Compartment covers. They will complement the engine bay perfectly and bring more attention to your GTR.

Made of Dry CF, the PWJDM Dry CF GTR Engine Compartment Covers fit perfectly. We redesigned these pieces a bit to give them more shape. We also took the time to delete the access doors since removing these for access only takes 30 secs. The initial installation takes only 5 minutes and requires absolutely no cutting or drilling at all. These lightweight and rigid PWJDM Dry CF GTR Engine Compartment Covers will set off your engine bay perfectly!

• The perfect mod for the engine bay
• Dry CF construction
• Made in the USA
• Perfect fit and finish
• Easy install, no cutting or drilling required

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in the weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Gurney Flap and Wickerbill is a short lip that protrudes upward from the upper trailing edge of the 2011-2021 Nissan R35 GTR's factory spoiler / Password:JDM Dry Carbon Fiber Elevated Rear Spoiler. It’s used to enhance the wing’s down-force characteristics by separating the airflow on the back side of the wing, primarily that which comes over the top of the wing. The result creates a localized high-pressure zone on the top side of the wing generating down-force.

When used in conjunction with a functional front splitter and canards, you will be able to enhance the overall aerodynamic characteristics of your GT-R.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Note: Our Gurney Flap is compatible with both the OEM spoiler and the Password:JDM Dry Carbon Fiber Elevated Rear Spoiler. This item does not fit on the Black Edition or Track Edition models. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 10-14 business days from the original purchase date. Due to high demand.

Password:JDM's R35 Rear Spoiler is a sleek addition to your R35. This spoiler sits slightly higher than your OEM spoiler giving your build a look to set you apart from the rest. Made of dry Carbon Fiber, this spoiler weighs significantly less than clear coated versions of this wing. 

Our spoiler features full dry carbon fiber construction, 60mm elevated height, slight offset towards the rear of the car, and integrated third brake light.

100% hand made in the USA!

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

When developing a true function-over-form product for the R35 GTR, sometimes the end-result happens to be extremely aesthetically pleasing as well! We had to put our thinking caps on when bringing a real “game changer” rear seat delete alternative to market… the premise for the design and build was to delete the rear seat and delete all the stuff required for the rear seats. this premise came about since we find the factory rear seats near useless by design. there was hardly any leg room, so why even bother. reducing as much weight as possible without making this car look bare and naked has been our agenda since day one. The PWJDM Rear Seat Delete project has followed this directive to a T.

To maintain and forever perpetuate the infamous PWJDM baller reputation, we definitely had to build them out of 100% dry carbon fiber and mold them to fit both the body and the car like a glove. Building upon the successes of the Tecnocraft ‘T1' racing seats (http://www.tecnocraft.com) from the premium side of Password Industries, Inc. We also kept in mind the interior “race bucket seat” theme and wanted a continuation of this effort for the rear seat deletes. what’s shown here is a true testament to PWJDM’s commitment to the platform as well as our abilities as a true tuner and developer of great products.

The first thing to notice would be the organic curvature of the rear seat delete, which provides structural strength and rigidity over just a simple flat design. Secondly, they have been molded in such a way to provide a tight, drop-in fit, and have eliminated the rear passenger seatbelt hardware – yes, you are correct, this weight-saving upgrade is strictly for off-road use only!

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

These lightweight Dry Carbon Fiber NACA ducts feature larger air inlet openings to direct a larger volume of air under the hood. They will in turn provide better cooling efficiency for the turbos and engine underneath the hood. These top quality NACA ducts, like all of our dry carbon fiber products, are 100% hand-made with our high-quality dry carbon fiber and special UV resistant epoxy resin.

All Password:JDM R35 GTR Dry Carbon Fiber Naca Ducts features an edge burn clear coat premium finish. The true to form process of applying multiple layers of UV protected clear coat to retain the factory shine matching the other GTR panels will provide a OEM factory look to the lighter dry carbon fiber piece.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Introducing the world's first true dry carbon fiber Nissan GT-R hood developed by Password:JDM. It's no secret, lighter cars do go faster (stop that much quicker as well) ... and by reducing the weight up from top, it also lowers your car's center of gravity, making it corner that much better. This dry carbon hood retains the original shape but reduced the overall weight by utilizing our state-of-the-art manufacturing process and race quality dry carbon fiber to scale in under 15lbs. Password:JDM is the first to market a weight reduction initiative for the all-new Nissan GTR and this hood is the first item of many products release to achieve that goal. Our product line is designed with form and function since it retains the original dimensions set forth by Nissan for the introduction of the GT-R to North America.

Every Password:JDM R35 GTR Dry Carbon Fiber Hood features an edge burn clear coat premium finish. The true to form process of applying multiple layers of UV protected clear coat to retain the factory shine matching the other GT-R panels will provide a OEM factory look to the lighter dry carbon fiber piece.

Installation Guide:
Click here to download the installation guide in .pdf format (444 KB)

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Made of Dry Carbon Kevlar, the Password:JDM Engine Compartment Covers fits perfectly. We redesigned these pieces, and they have a new "Z" shaped design on both sides. We also took the time to delete the access doors since removing these for access really only takes 30 secs. The initial installation takes only 5 mins and requires absolutely no cutting or drilling at all. These lightweight and rigid Password:JDM Dry Carbon Kevlar Engine Compartment Covers will set off your engine bay perfectly!

- Perfect mod for the engine bay
- Dry CF construction
- Made in the USA
- Perfect fit and finish
- Easy install, no cutting or drilling required

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Compartment Covers for your +09 370Z is an excellent way to clean up the look of your engine bay. These are the 1st versions of the compartment covers, they have a sleek and smooth finish on top.  The compartment covers are a great way to improve your engine bay look if you are interested in propping your head up at your local meets. Install is quick and easy, as they are a direct fit. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Upgrade and replace the Factory Nissan 'Carbon Mats' with true Dry Carbon Floor Mats from Password:JDM! Our Dry Carbon Floor Mats are extremely durable, and high strength. High-heel safe! 100% molded to GTR driver and passenger footwell and 'lock' into place once installed and includes integrated rubber edge liner. Only weighs 2.5lbs each side!

Installation:
- Slide the seat all the way back, drop the mats in, and roll.
- Removal of carpet mats required, install on top of bare interior carpet

Note:These will not fit the 2014 model.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Compartment Covers for your +09 370Z is an excellent way to clean up the look of your engine bay. These are the 1st versions of the compartment covers, they have a sleek and smooth finish on top.  The compartment covers are a great way to improve your engine bay look if you are interested in propping your head up at your local meets. Install is quick and easy, as they are a direct fit. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Password:JDM has done it again! We have crafted this exotic, race inspired, dry carbon intake manifold cover to spice up the look of your 2003-2008 Nissan 350z engine bay! Like all of our Dry Carbon parts we manufacture, this intake manifold cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this plug cover will always look & function as good as the day you bought it!

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Canards for the 2008+ R35 Nissan GTR will generate down-force on the front end to help stabilize your vehicle at high speeds. With the use of a functional front splitter, you can balance the amount of down-force required as per your setup and application per racetrack.

This Password:JDM Canards include an edge burn clear coat premium finish. The true to form process of applying multiple layers of UV protected clear coat to retain the factory shine matching the other body panels will provide an OEM factory look to the lighter dry carbon fiber piece.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.