Civic

The Password:JDM Dry Carbon Fiber Gurney Flap / Wickerbill is a short lip that protrudes upward from the upper trailing edge of the 2013-2015 Civic Si 4DR's factory wing. It’s used to enhance the wing’s down-force characteristics by separating the airflow on the back side of the wing, primarily that which comes over the top of the wing. The result creates a localized high pressure zone on the top side of the wing generating down-force.

When used in conjunction with a functional front splitter / canards, you will be able to enhance the overall aerodynamic characteristics of your 2013+ Civic Si 4DR.

Care instructions: Please note that these parts are finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a finger print, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable. Such minor imperfections are race industry standard and considered acceptable.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your EK Civic's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Fiber Cooling Plate for the 96-00 Honda Civic to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon versions.

• Quick 10 minute install
• Super light dry carbon cover
• Includes two Password:JDM Fender Washers for mounting

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Gurney Flap / Wickerbill is a short lip that protrudes upward from the upper trailing edge of the FC2 Civic Si factory wing. It’s used to enhance the wing’s downforce characteristics by separating the airflow on the back side of the wing, primarily that which comes over the top of the wing. The result creates a localized high pressure zone on the top side of the wing generating downforce.

When used in conjunction with a functional front splitter / canards, you will be able to enhance the overall aerodynamic characteristics of your FC2 Si

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Bumper Ducts for the 2006-2008 Honda Civic 2dr coupe are designed to serve multiple purposes based on your vehicles needs. First, the bumper ducts can be used to route cool air to your braking system to keep your brakes from overheating in a race environment. Second, you can use the ducts to route cool air to your air intake system. Whatever purpose you use our ducts for, your vehicles our ducts will add an aggressive and unique look to the front end of our Civic product car!

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Gurney Flap / Wickerbill is a short lip that protrudes upward from the upper trailing edge of the FC1 Civic Si SEDAN factory wing. It’s used to enhance the wing’s down-force characteristics by separating the airflow on the backside of the wing, primarily that which comes over the top of the wing. The result creates a localized high-pressure zone on the top side of the wing generating down-force.

When used in conjunction with a functional front splitter / canards, you will be able to enhance the overall aerodynamic characteristics of your FC1 Si

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV-resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your 2014-2015 Honda Civic Coupe's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Fiber Cooling Plate for the 2014+ Honda Civic Si Coupe to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon versions.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a finger print, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable. Such minor imperfections are race industry standard and considered acceptable.

This item usually ships out in 3-5 business days from the original purchase date.

If you are prepping your EK Civic for the track or you are just that hard core, then we have the perfect Dry Carbon piece for you. The Password:JDM Dry Carbon Aero Grille is the ultimate functional item for all the serious EK track junkies. With this product, PWJDM has deleted one of the unnecessary features of the EK while improving its frontal aerodynamics.  

lets face it, the EK isn't that far away from its older sibling, the EG6 or its cousin, the DC2. other than just aesthetics, why does the EK have an extra opening in the front? I mean seriously, its not any better for cooling and it's really counterproductive for aerodynamics. I have never seen an EG6 or DC2, both of which does not have an upper grille opening, suffer from any overheating issues. Add the Password:JDM Dry Carbon Ram Air Scoop to complete the package!

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good, and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM dry carbon fiber ECU over-cover for the 2006-2011 Honda Civic adheres to your stock ECU and will help clean up the look of your engine bay making your engine stand out, while adding a much needed accent to the scene.

Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it.

Note:The Password:JDM Dry Carbon Fiber ECU Over Cover fits over the factory part and is adhered with double side tape.

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your EG Civic's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Fiber Cooling Plate for the 92-95 Honda Civic to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling effeciency with the PWJDM radiator cooling plate, you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon versions.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Designed to ram/force feed colder atmospheric air into your engine at all speeds, the Password:JDM Dry Carbon Fiber Ram Air Scoop will allow your intake system to work at full potential.

Each one of the PasswordJDM Dry Carbon Fiber Ram Air Scoops are individually hand crafted here in the states for quality. The Password:JDM Dry Carbon Ram Air Scoop is a simple bolt on installation that can be performed in minutes. Simply swap this carbon scoop in place of your factory headlight and your done!

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good, and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM dry carbon fiber ECU over-cover for the 2017+ Honda Civic Type R adheres to your stock ECU and will help clean up the look of your engine bay making your engine stand out, while adding a much needed accent to the scene.

Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it.

Note:The Password:JDM Dry Carbon Fiber ECU Over Cover fits over the factory part and is adhered with double side tape.

Fitment: Fits all 2017+ Honda Civic Type R model only

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Confirmed fitment for 06-11 Civic!!
Part of modding your car is making it look good, and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM dry carbon fiber battery cover for the 2006-2015 Honda Civic uses the factory mounting hardware to cover your battery and will help clean up the look of your engine bay making your engine stand out, while adding a much needed accent to the scene.

Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it.

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your 2013-2015 Honda Civic Si Sedan's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Fiber Cooling Plate for the 2013-2015 Honda Civic Si Sedan to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon versions.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your 2016+ Honda Civic operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Fiber Cooling Plate for the 2016+ Honda Civic to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving. We also designed and incorporated "pockets" on the cooling plate which will increase airflow directly to the turbo and intake areas to help with cooling.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon versions.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a finger print, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable. Such minor imperfections are race industry standard and considered acceptable.

This item usually ships out in 3-5 business days from the original purchase date.

If you are prepping your EK Civic for the track or you are just that hard core, then we have the perfect Dry Carbon piece for you. The Password:JDM Dry Carbon Fiber Headlight Blockoff Plate is the ultimate functional item for all the serious EK track junkies. With this product, you can shave a ton of unnecessary weight by removing the stock headlight and replacing them with these block off plates!

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Carbon Fiber Airbag Trays have been described as a work of art! We showed this off to everyone, and they had only nice things to say! To us, it's just another product that we should have made available a long, long time ago. Our carbon fiber airbag trays are a direct replacement! It's perfect for those who choose to have their airbag removed for safety reasons on road courses or when drag racing.


Crafted from aerospace grade 2x2 twill carbon fiber and 100% high solid epoxy resin, our bags trays are designed to fit USDM vehicles without any modification to your stock dash. What this means is that you can retain your factory airbag and reinstall it later if you need to. The Password:JDM Carbon Fiber Airbag Trays are truly plug & play! Installation takes less than 20 minutes and requires only the basic tools that every car enthusiast should have. A quality fit and finish is guaranteed.

The Password:JDM Carbon Fiber Airbag Tray is a nice finishing touch to any vehicle that's show/race worthy. These are high quality pieces crafted here in the US. Like all of Password:JDMs products, these are produced one at a time. The exceptionally consistent quality you would expect from us is delivered each and every single time.

Note - This version of the Password:JDM Carbon Fiber Airbag Tray will not fit the '93-'97 DelSol.

Modifying, disconnecting, or removing airbag systems, components and/or hardware should only be done on vehicles used purely for race/show purpose only. In some countries, it is illegal to tamper or modify any portion of the supplemental restraint system (SRS). Please check with your local, state and/or federal laws pertaining to automotive SRS systems. Password does not assume any liability for damages resulting from the use of our Airbag trays. End users assumes all liabilities when using this product. Our Airbag trays are intended strictly for off-road racing use only!!!

Mounting requires the use of some sort of bonding agent such as double sided tape along the edges or a silicon adhesive. Removal of the factory airbag (SRS) should be done by a trained and certified professional who knows how to disconnect the battery and SRS control unit prior to any airbag removal.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The all new Password:JDM Dry Carbon 2pc Front Splitter for the 2012-2015 Honda Civic Si Sedan gives an aggressive look and a wider stance while emphasizing the lines of the front fascia...These 2-piece kits are fabricated with only the best carbon composites. This product can come as the 2pc kit only or can be upgraded to the full 3pc kit as currently pictured. (See: PASSWORD:JDM CARBON FRONT SPLITTER CENTER PANEL)

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good, and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM dry carbon fiber ECU over-cover for the 2012-2015 Honda Civic adheres to your stock ECU and will help clean up the look of your engine bay making your engine stand out, while adding a much needed accent to the scene.

Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it.

Note:The Password:JDM Dry Carbon Fiber ECU Over Cover fits over the factory part and is adhered with double side tape.

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good, and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM Dry Carbon Fiber Pulley Shield for the 2016+ Honda Civic bolts on using factory mounting holes and will help clean up the look of your engine bay making your engine stand out, while adding a much needed accent to the scene.

Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it.

Fitment: Fits all 2016+ Honda Civic SI


Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good, and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM Dry Carbon Fiber Coolant Reservoir Cover for the 2016+ Honda Civic Type R bolts on using factory mounting holes and will help clean up the look of your engine bay making your engine stand out, while adding a much needed accent to the scene.

Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it.

Fitment: Fits all 2016+ Honda Civic Type R

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good, and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM dry carbon fiber engine frame shields for the 2014-2015 Honda Civic Si coupe uses the factory mounting hardware from the fenders to cover up the open gaps in your engine bay and will help clean up the look of your engine bay, while adding a much needed accent to the scene.

Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it. Includes right and left side pieces.

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good, and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM dry carbon fiber battery cover for the 2017 Honda Civic Type R uses the factory mounting hardware to cover your battery and will help clean up the look of your engine bay making your engine stand out, while adding a much needed accent to the scene.

Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it.

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Password:JDM has done it again! We have crafted these exotic, race inspired, dry carbon coil pack covers to spice up the look of your 2012-2015 Honda Civic Si's engine bay! Like all of our Dry Carbon parts we manufacture, this plug cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this plug cover will always look & function as good as the day you bought it! Fits any models with K24z7 engine.

Disclaimer:
All Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a finger print, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable. Such minor imperfections are race industry standard and considered acceptable. Therefore it is NOT considered to be defective.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Password:JDM has done it again! We have crafted these exotic, race inspired, dry carbon engine covers to spice up the look of your 2016+ Honda Civic engine bay! Like all of our Dry Carbon parts we manufacture, this plug cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this plug cover will always look & function as good as the day you bought it!

Note: This part for it to sit flush and level will require you to snip off the OEM plastic ring on the left side mounting hole which will not cause any issues if you remove it. If you want to keep that plastic ring then simply buy a longer bolt (about 30mm or so) and you will be able to install this part no problem.

Fitment: All 2016+ Honda Civic except Type R

Disclaimer:
All Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a finger print, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable. Such minor imperfections are race industry standard and considered acceptable. Therefore it is NOT considered to be defective.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your FG 2006-2011 Civic's Coupes operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Fiber Cooling Plate for the 06+ Honda Civic 2Dr Coupe to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon versions.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your FA 2006-2011 Civic's Sedans operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Fiber Cooling Plate for the 06+ Honda Civic 4dr with the JDM Front End Conversion to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon versions.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Carbon Fiber Airbag Trays have been described as a work of art! We showed this off and everyone only had nice things to say! But to us, it's just another product that we should have made available a long time ago. Our Password:JDM Carbon Fiber Airbag Trays are a direct replacement! It's perfect for those who choose to have their airbag removed for safety reasons on road courses or when drag racing.

Crafted from aerospace grade 2x2 twill Carbon Fiber and 100% high solid epoxy resin, our bags trays are designed to fit the USDM vehicles without any modification to your stock dash. What this means is that you can retain your factory airbag and reinstall it later if you need to. The Password:JDM Carbon Fiber Airbag Trays are truly plug & play! Installation takes less than 20 minutes, and requires only the basic tools that every car enthusiast should have! A quality fit and finish is guaranteed.

The Password:JDM Carbon Fiber Airbag Tray is a nice finishing touch to any vehicle that's show/race worthy. These are high quality pieces crafted here in the States. Like all of Password:JDM's products, these are produced one at a time. The exceptionally consistent quality you would expect from us is delivered each and every single time.


Modifying, disconnecting, or removing airbag systems, components and/or hardware should only be done on vehicles used purely for race/show purpose only. In some countries, it is illegal to tamper or modify any portion of the supplemental restraint system (SRS). Please check with your local, state and/or federal laws pertaining to automotive SRS systems. Password does not assume any liability for damages resulting from the use of our Airbag trays. End users assumes all liabilities when using this product. Our Airbag trays are intended strictly for off-road racing use only!!!

Mounting requires the use of some sort of bonding agent such as double sided tape along the edges or a silicon adhesive. Removal of the factory airbag (SRS) should be done by a trained and certified professional who knows how to disconnect the battery and SRS control unit prior to any airbag removal.

Disclaimer:
All Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a finger print, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable. Such minor imperfections are race industry standard and considered acceptable. Therefore it is NOT considered to be defective.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

If you are prepping your EG Civic for the track or you are just that hard core, then we have the perfect Dry Carbon piece for you. The Password:JDM Dry Carbon Fiber Headlight Blockoff Plate is the ultimate functional item for all the serious EG track junkies. With this product, you can shave a ton of unnecessary weight by removing the stock headlight and replacing them with these block off plates!

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Password:JDM has done it again! We have crafted these exotic, race inspired, dry carbon engine covers to spice up the look of your 2016+ Honda Civic engine bay! Like all of our Dry Carbon parts we manufacture, this plug cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this plug cover will always look & function as good as the day you bought it!

Fitment: All 2016+ Honda Civic except Type R

Disclaimer:
All Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a finger print, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable. Such minor imperfections are race industry standard and considered acceptable. Therefore it is NOT considered to be defective.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Password:JDM Dry Carbon 2pc Front Splitter for the 2014+ Honda Civic Si Coupe gives an aggressive look and a wider stance while emphasizing the lines of the front fascia...These 2-piece kits are fabricated with only the best carbon composites. This product can come as the 2pc kit only or can be upgraded to the full 3pc kit as currently pictured. (See: PASSWORD:JDM CARBON FRONT SPLITTER CENTER PANEL)

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good, and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM dry carbon fiber engine frame shields for the 2016+ Honda Civic uses the factory mounting hardware from the fenders to cover up the open gaps in your engine bay and will help clean up the look of your engine bay, while adding a much needed accent to the scene. It is also a functional part as we created a curve at the ends of each side to allow hot air to escape thru to the fenders and out the side vents.

Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it. Includes right and left side pieces.

Fitment: Fits all 2016+ Honda Civic including Type R

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good, and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM dry carbon fiber engine frame shields for the 2012-2015 Honda Civic Si sedan uses the factory mounting hardware from the fenders to cover up the open gaps in your engine bay and will help clean up the look of your engine bay, while adding a much needed accent to the scene.

Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it. Includes right and left side pieces.

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Gurney Flap / Wickerbill is a short lip that protrudes upward from the upper trailing edge of the FC1 Civic Si Sedan factory wing. It’s used to enhance the wing’s downforce characteristics by separating the airflow on the backside of the wing, primarily that which comes over the top of the wing. The result creates a localized high-pressure zone on the top side of the wing generating downforce.

When used in conjunction with a functional front splitter/canards, you will be able to enhance the overall aerodynamic characteristics of your FC1 Si

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV-resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

If you are prepping your EK Civic for the track or you are just that hard core, then we have the perfect Dry Carbon piece for you. The Password:JDM Dry Carbon Aero Grille is the ultimate functional item for all the serious EK track junkies. With this product, PWJDM has deleted one of the unnecessary features of the EK while improving its frontal aerodynamics.  

lets face it, the EK isn't that far away from its older sibling, the EG6 or its cousin, the DC2. other than just aesthetics, why does the EK have an extra opening in the front? I mean seriously, its not any better for cooling and it's really counterproductive for aerodynamics. I have never seen an EG6 or DC2, both of which does not have an upper grille opening, suffer from any overheating issues. Add the Password:JDM Dry Carbon Ram Air Scoop to complete the package!

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Make you and your ride more noticeable with this J's style EK '99-'00 Civic Carbon Fiber Front Lip! What sets Password:JDM apart is that our carbon fiber is very flexible (similar to flexible-FRP found on most JDM lip kits) and will not crack easily under normal daily driving. It's a great way to get the attention you deserve!

Password:JDM carbon fiber lips are made from the finest grade "A" carbon fiber available. Each lip is protected with a UV coating that will allow the lip to hold its high gloss finish. Password:JDM carbon fiber lips have a tight carbon weave.

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Password:JDM has done it again! We have crafted these exotic, race inspired, dry carbon engine covers to spice up the look of your 2006-2015 Honda Civic NON-Si's engine bay! We all know that the R18 engine does not receive the attention that the Si does and so we decided to step in and help fulfill the dreams of those that want to modify their R18 engines and make it look cool!

Like all of our Dry Carbon parts we manufacture, this plug cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this plug cover will always look & function as good as the day you bought it! Fits all 2006+ R18 engine, so both 8th and 9th gen Civics.

Disclaimer:
All Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a finger print, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable. Such minor imperfections are race industry standard and considered acceptable. Therefore it is NOT considered to be defective.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good, and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM Dry Carbon Fiber ChargePipe for the 2016+ Honda Civic bolts on using factory mounting holes and will help clean up the look of your engine bay making your engine stand out, while adding a much needed accent to the scene. The part is uniquely molded with our Password P log and the "Turbo" lettering to give it that distinct look that you would expect from our carbon products.

Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it.

Fitment: Fits all 2016+ Honda Civic models except Type R

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon 2pc Front Splitter for the 2012-2015 Honda Civic 4dr Sedan will add an aggressive look and gives a wider stance while emphasizing the lines of the front fascia...These 2-piece kits are fabricated with only the best carbon composites. Please note that in order to install these you will be required to drill new holes under the front bumper.

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good, and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood. The Password:JDM dry carbon fiber ECU over-cover for the 2016+ Honda Civic adheres to your stock ECU and will help clean up the look of your engine bay making your engine stand out, while adding a much needed accent to the scene. Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it.

Note:The Password:JDM Dry Carbon Fiber ECU Over Cover fits over the factory part and is adhered with double side tape.

Fitment: Fits all 2016+ Honda Civic models except Type R

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Bumper Ducts are designed to serve multiple purposes based on your vehicles needs. First, the bumper ducts can be used to route cool air to your braking system to keep your brakes from overheating in a race environment. Second, you can use the ducts to route cool air to your air intake system. Whatever purpose you use our ducts for, your vehicles our ducts will add an aggressive and unique look to the front end of our Civic product car!

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Bumper Ducts are designed to serve multiple purposes based on your vehicles needs. First, the bumper ducts can be used to route cool air to your braking system to keep your brakes from overheating in a race environment. Second, you can use the ducts to route cool air to your air intake system. Whatever purpose you use our ducts for, your vehicles our ducts will add an aggressive and unique look to the front end of our Civic product car!

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Bumper Ducts are designed to serve multiple purposes based on your vehicles needs. First, the bumper ducts can be used to route cool air to your braking system to keep your brakes from overheating in a race environment. Second, you can use the ducts to route cool air to your air intake system. Whatever purpose you use our ducts for, your vehicles our ducts will add an aggressive and unique look to the front end of our Civic product car!

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Bumper Ducts for the 2009-2011 Honda Civic 4dr are designed to serve multiple purposes based on your vehicles needs. First, the bumper ducts can be used to route cool air to your braking system to keep your brakes from overheating in a race environment. Second, you can use the ducts to route cool air to your air intake system. Whatever purpose you use our ducts for, your vehicles our ducts will add an aggressive and unique look to the front end of our Civic product car!

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Bumper Ducts for the 2009-2011 Honda Civic 2dr coupe are designed to serve multiple purposes based on your vehicles needs. First, the bumper ducts can be used to route cool air to your braking system to keep your brakes from overheating in a race environment. Second, you can use the ducts to route cool air to your air intake system. Whatever purpose you use our ducts for, your vehicles our ducts will add an aggressive and unique look to the front end of our Civic product car!

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Bumper Ducts for the 2006-2008 Honda Civic 2dr coupe are designed to serve multiple purposes based on your vehicles needs. First, the bumper ducts can be used to route cool air to your braking system to keep your brakes from overheating in a race environment. Second, you can use the ducts to route cool air to your air intake system. Whatever purpose you use our ducts for, your vehicles our ducts will add an aggressive and unique look to the front end of our Civic product car!

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.