96-00 Civic (6th Gen)

The Password:JDM Dry Carbon Fiber Gurney Flap / Wickerbill is a short lip that protrudes upward from the upper trailing edge of the 99-00 Civic Si factory wing. It’s used to enhance the wing’s down-force characteristics by separating the airflow on the back side of the wing, primarily that which comes over the top of the wing. The result creates a localized high-pressure zone on the top side of the wing generating down-force.

When used in conjunction with a functional front splitter and canards, you will be able to enhance the overall aerodynamic characteristics of your EMI Civic Si 2DR.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

The Password:JDM Carbon Fiber Airbag Trays have been described as a work of art! We showed this off and everyone only had nice things to say! But to us, it's just another product that we should have made available a long time ago. Our Password:JDM Carbon Fiber Airbag Trays are a direct replacement! It's perfect for those who choose to have their airbag removed for safety reasons on road courses or when drag racing.

Crafted from aerospace grade 2x2 twill Carbon Fiber and 100% high solid epoxy resin, our bags trays are designed to fit the USDM vehicles without any modification to your stock dash. What this means is that you can retain your factory airbag and reinstall it later if you need to. The Password:JDM Carbon Fiber Airbag Trays are truly plug & play! Installation takes less than 20 minutes, and requires only the basic tools that every car enthusiast should have! A quality fit and finish is guaranteed.

The Password:JDM Carbon Fiber Airbag Tray is a nice finishing touch to any vehicle that's show/race worthy. These are high quality pieces crafted here in the States. Like all of Password:JDM's products, these are produced one at a time. The exceptionally consistent quality you would expect from us is delivered each and every single time.


Modifying, disconnecting, or removing airbag systems, components and/or hardware should only be done on vehicles used purely for race/show purpose only. In some countries, it is illegal to tamper or modify any portion of the supplemental restraint system (SRS). Please check with your local, state and/or federal laws pertaining to automotive SRS systems. Password does not assume any liability for damages resulting from the use of our Airbag trays. End users assumes all liabilities when using this product. Our Airbag trays are intended strictly for off-road racing use only!!!

Mounting requires the use of some sort of bonding agent such as double sided tape along the edges or a silicon adhesive. Removal of the factory airbag (SRS) should be done by a trained and certified professional who knows how to disconnect the battery and SRS control unit prior to any airbag removal.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer:
All Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a finger print, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable. Such minor imperfections are race industry standard and considered acceptable. Therefore it is NOT considered to be defective.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your EK Civic's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Fiber Cooling Plate for the 96-00 Honda Civic to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, but you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon version.

• Quick 10-minute install
• Super light dry carbon cover

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Made of aerospace quality carbon fiber, the Password:JDM Dry Carbon Fiber PowerChamber Intake for the 92-95 Honda Civic / 96-00 Honda Civic surpasses any other intake on the market in quality, and in performance. Our intake is dyno proven to make 6.5 WHP and 7.4 FTQ on a nearly stock B16A engine! Manufactured here in the USA, the Power Chamber is constructed of the finest carbon fiber, and filter elements currently available on the market. The Power Chamber Intake comes complete with all mounting hardware required to install on your vehicle.

Using a unique flared intake tube design, the Power Chamber is able to deliver noticeable gains across the entire power band. This intake gives you the best of both worlds. The security of knowing you are at no risk of hydro-lock, the power delivery that most cold air intake systems can only dream of, and the unmatched style of a genuinely unique intake system.

Through integration of form and function, the Power Chamber will make a bold statement about you and your vehicle. Spectators all around will notice your fine taste in performance products, and will envy your engine bay's unique styling!

Note:The normal PowerChamber air filter will be substituted for a larger air filter designed specifically for the velocity stack.

Disclaimer:
All Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a finger print, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable. Such minor imperfections are race industry standard and considered acceptable. Therefore it is NOT considered to be defective.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

NOTE: This product is NOT legal for sale, installation, or use on a pollution-controlled vehicle in the state of California. This product is NOT CARB legal. Legal only for racing vehicles in closed course competitions which will never be driven on a public right of way. California orders will be canceled and refunded.

Part of modding your car is making it look good, and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM dry carbon fiber fuse box over-cover for the 1992-2000 Honda Civic / 1994-2001 Acura Integra adheres to your stock fuse box cover and will help clean up the look of your engine bay making your engine stand out, while adding a much needed accent to the scene.

Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it.

Note: The Password:JDM Dry Carbon Fiber Fuse Box Over Cover fits over the factory part and is adhered with double side tape.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Presenting yet another Password:JDM exclusive! Here are our new Password:JDM Carbon Fiber Fuel Pump Covers! You will NOT find these anywhere else! These carbon fiber fuel pump covers are a direct replacement. For those of you who have taken out your rear seats, these will definitely add some style to that dull “gutted out” look.

All Password:JDM carbon fiber products are made from the finest grade "A" carbon fiber available. Each fuel pump cover is protected with a UV coating that will allow the piece to hold its high gloss finish. Password:JDM carbon fiber products have a tight carbon weave.

This application will fit all:
1992-1995 EG Civic Hatchback
1992-1995 EG Civic Coupe
1992-1995 EG Civic Sedan
1996-2000 EK Civic Hatchback
1996-2000 EK Civic Coupe
1996-2000 EK Civic Sedan

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Replacement Air Filter:

• PowerChamber Intake EK, DC, RSX, FG, 
• Height: 6"
• Flange I.D: 4.5" 
• Top Outside Dia: 5"

Designed to ram/force feed colder atmospheric air into your engine at all speeds, the Password:JDM Dry Carbon Ram Air Scoop will allow your intake system to work at full potential.

Each one of the PasswordJDM Dry Carbon Ram Air Scoops are individually hand crafted here in the states for quality. The Password:JDM Dry Carbon Ram Air Scoop is a simple bolt on installation that can be performed in minutes. Simply swap this carbon scoop in place of your factory headlight and you're done!

NOTE: For this item, the side you want the part to be on would be viewed from the USDM Driver Seat (Left Side Driver). If you have any questions, feel free to contact us to ensure you get the correct item.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Are you building a track monster out of your 96-00 Civic? Upgrading your OG cluster to a digital one? When you rip out the OEM cluster there's going to be a lot of space to fill and hold in your new display. Password:JDM's Dry Carbon Cluster Delete helps you fill that void and gives you an area to mount on. Please note, once altered in any way, we cannot accept any Tecnocraft item for return or exchange. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

If you are prepping your EK Civic for the track or you are just that hard core, then we have the perfect Dry Carbon piece for you. The Password:JDM Dry Carbon Aero Grille is the ultimate functional item for all the serious EK track junkies. With this product, PWJDM has deleted one of the unnecessary features of the EK while improving its frontal aerodynamics.  

lets face it, the EK isn't that far away from its older sibling, the EG6 or its cousin, the DC2. other than just aesthetics, why does the EK have an extra opening in the front? I mean seriously, its not any better for cooling and it's really counterproductive for aerodynamics. I have never seen an EG6 or DC2, both of which does not have an upper grille opening, suffer from any overheating issues. Add the Password:JDM Dry Carbon Ram Air Scoop to complete the package!

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Take your street or track car to the next level with this J's style carbon fiber from bumper lip. This carbon fiber lip is a direct bolt on installation, with OEM fitment, and features a 2x2 weave. Fits all 1996-1998 Honda Civic models.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 5-7 business days from the original purchase date.

If you are prepping your EK Civic for the track or you are just that hard core, then we have the perfect Dry Carbon piece for you. The Password:JDM Dry Carbon Fiber Headlight Blockoff Plate is the ultimate functional item for all the serious EK track junkies. With this product, you can shave a ton of unnecessary weight by removing the stock headlight and replacing them with these block off plates!

NOTE: For this item, the side you want the part to be on would be viewed from the USDM Driver Seat (Left Side Driver). If you have any questions, feel free to contact us to ensure you get the correct item.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Carbon Fiber CTR Base (EK 96-00 Civic Hatchback) is a subtle flex to add on to your hatch. This will replace the OEM CTR Base and is made out of dry carbon, cutting the weight of the OEM base by almost half. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Presenting yet another Password:JDM exclusive! Here are our new Password:JDM Carbon Kevlar Fuel Pump Covers! You will NOT find these anywhere else! These Carbon Kevlar fuel pump covers are a direct replacement. For those of you who have taken out your rear seats, these will definitely add some style to that dull “gutted out” look.

All Password:JDM Carbon Kevlar products are made from the finest grade "A" Carbon Kevlar available. Each fuel pump cover is protected with a UV coating that will allow the piece to hold its high gloss finish. Password:JDM Carbon Kevlar products have a tight carbon weave.

This application will fit all:
1992-1995 EG Civic Hatchback
1992-1995 EG Civic Coupe
1992-1995 EG Civic Sedan
1996-2000 EK Civic Hatchback
1996-2000 EK Civic Coupe
1996-2000 EK Civic Sedan

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Carbon Kevlar Airbag Trays have been described as a work of art! We showed this off and everyone only had nice things to say! But to us, it's just another product that we should have made available a long time ago. Our Password:JDM Carbon Kevlar Airbag Trays are a direct replacement! It's perfect for those who choose to have their airbag removed for safety reasons on road courses or when drag racing.

Crafted from aerospace grade 2x2 twill Carbon Kevlar and 100% high solid epoxy resin, our bags trays are designed to fit the USDM vehicles without any modification to your stock dash. What this means is that you can retain your factory airbag and reinstall it later if you need to. The Password:JDM Carbon Kevlar Airbag Trays are truly plug & play! Installation takes less than 20 minutes, and requires only the basic tools that every car enthusiast should have! A quality fit and finish is guaranteed.

The Password:JDM Carbon Kevlar Airbag Tray is a nice finishing touch to any vehicle that's show/race worthy. These are high quality pieces crafted here in the States. Like all of Password:JDM's products, these are produced one at a time. The exceptionally consistent quality you would expect from us is delivered each and every single time.
 

Modifying, disconnecting, or removing airbag systems, components and/or hardware should only be done on vehicles used purely for race/show purpose only. In some countries, it is illegal to tamper or modify any portion of the supplemental restraint system (SRS). Please check with your local, state and/or federal laws pertaining to automotive SRS systems. Password does not assume any liability for damages resulting from the use of our Airbag trays. End users assumes all liabilities when using this product. Our Airbag trays are intended strictly for off-road racing use only!!!

Mounting requires the use of some sort of bonding agent such as double sided tape along the edges or a silicon adhesive. Removal of the factory airbag (SRS) should be done by a trained and certified professional who knows how to disconnect the battery and SRS control unit prior to any airbag removal.

Disclaimer:
All Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a finger print, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable. Such minor imperfections are race industry standard and considered acceptable. Therefore it is NOT considered to be defective.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your EK Civic's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Kevlar Cooling Plate for the 96-00 Honda Civic to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon versions.

• Quick 10 minute install
• Super light dry carbon cover
• Includes two Password:JDM Fender Washers for mounting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Make you and your ride more noticeable with this J's style EK '99-'00 Civic Carbon Fiber Front Lip! What sets Password:JDM apart is that our carbon fiber is very flexible (similar to flexible-FRP found on most JDM lip kits) and will not crack easily under normal daily driving. It's a great way to get the attention you deserve!

Password:JDM carbon fiber lips are made from the finest grade "A" carbon fiber available. Each lip is protected with a UV coating that will allow the lip to hold its high gloss finish. Password:JDM carbon fiber lips have a tight carbon weave.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Carbon Fiber Airbag Trays have been described as a work of art! We showed this off and everyone only had nice things to say! But to us, it's just another product that we should have made available a long time ago. Our Password:JDM Carbon Fiber Airbag Trays are a direct replacement! It's perfect for those who choose to have their airbag removed for safety reasons on road courses or when drag racing.

Note: This version is specifically designed for right hand drive vehicles only.

Crafted from aerospace grade 2x2 twill Carbon Fiber and 100% high solid epoxy resin, our bags trays are designed to fit the USDM vehicles without any modification to your stock dash. What this means is that you can retain your factory airbag and reinstall it later if you need to. The Password:JDM Carbon Fiber Airbag Trays are truly plug & play! Installation takes less than 20 minutes, and requires only the basic tools that every car enthusiast should have! A quality fit and finish is guaranteed.

The Password:JDM Carbon Fiber Airbag Tray is a nice finishing touch to any vehicle that's show/race worthy. These are high quality pieces crafted here in the States. Like all of Password:JDM's products, these are produced one at a time. The exceptionally consistent quality you would expect from us is delivered each and every single time.

Available fitments:

EK '96-'00 Civic


Modifying, disconnecting, or removing airbag systems, components and/or hardware should only be done on vehicles used purely for race/show purpose only. In some countries, it is illegal to tamper or modify any portion of the supplemental restraint system (SRS). Please check with your local, state and/or federal laws pertaining to automotive SRS systems. Password does not assume any liability for damages resulting from the use of our Airbag trays. End users assumes all liabilities when using this product. Our Airbag trays are intended strictly for off-road racing use only!!!

Mounting requires the use of some sort of bonding agent such as double sided tape along the edges or a silicon adhesive. Removal of the factory airbag (SRS) should be done by a trained and certified professional who knows how to disconnect the battery and SRS control unit prior to any airbag removal.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

You trying to rep our logo at your next meet? Make sure to grab one of our License Plate Frames! This frame has our name on it, so people know you got some Carbon Fiber goods under the hood when you pull up. Easy to install (we hope you can do this), and instant flex points. 

Care instructions: Wash your car so you don't get a brown font on the Frame, and you'll be good to go.

Disclaimer: Your hand will become tired from pointing to your license plate frame constantly whenever people ask "Yo, where did you get those Carbon Fiber parts?". Please ask a medical professional for a wrist brace or splint. 

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

If you are prepping your EK Civic for the track or you are just that hard core, then we have the perfect Dry Carbon piece for you. The Password:JDM Dry Carbon Aero Grille is the ultimate functional item for all the serious EK track junkies. With this product, PWJDM has deleted one of the unnecessary features of the EK while improving its frontal aerodynamics.  

lets face it, the EK isn't that far away from its older sibling, the EG6 or its cousin, the DC2. other than just aesthetics, why does the EK have an extra opening in the front? I mean seriously, its not any better for cooling and it's really counterproductive for aerodynamics. I have never seen an EG6 or DC2, both of which does not have an upper grille opening, suffer from any overheating issues. Add the Password:JDM Dry Carbon Ram Air Scoop to complete the package!

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Are you building a track monster out of your 96-00 Civic? Upgrading your OG cluster to a digital one? When you rip out the OEM cluster there's going to be a lot of space to fill and hold in your new display. Password:JDM's Dry Carbon Cluster Delete helps you fill that void and gives you an area to mount on. 

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Disclaimer: Tecnocraft Composites and Password:JDM's B Stock items are items that didn't quite pass our quality standards. The items on the B Stock page are fully functional and great products for someone who doesn't mind a small imperfection for a discounted price. Tecnocraft does not accept returns on B stock items. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. 

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

JDM cars can now one up another by rocking our Password:JDM Dry Carbon Fog lamps covers. When you go to meets and stuff, look at the cars, they all pretty much look the same. Made of Dry Carbon, these PasswordJDM fog lamp covers will set your ride apart from everyone else. Password:JDM understands this, and that’s why we came up with these. Not for everybody, only a chosen few…. Rock these covers only if you know what’s up with Dry Carbon.

These Dry Carbon Fog Lamp Covers will add the subtle difference to your ride. Looks cool and does a lot for your image. Like we’ve said time and time again, grab them today, rock them tomorrow, and be forever hated from there on after. Passwords got you covered.

Current Applications:

EG 2Dr/HB EK 99-00 Civic Availability

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Tecnocraft Dry Carbon Fiber Universal Hood Vents, serve several, purpose like improved cooling by allowing hot air to exit the engine bay more efficiently.  Aerodynamics by reduced air pressure buildup in the engine compartment.

Dimensions: 

• Overall Length: (17.25in)
• Overall Width:(4.75in)
• Approximate Height: (2in)

NOTE: These vents do not include hardware and are not pre-drilled. These vents are sold as a pair.

The Password:JDM Carbon Fiber CTR Base (EK 96-00 Civic Hatchback) is a subtle flex to add on to your hatch. This will replace the OEM CTR Base and is made out of dry carbon, cutting the weight of the OEM base by almost half. 

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Disclaimer: Tecnocraft Composites and Password:JDM's B Stock items are items that didn't quite pass our quality standards. The items on the B Stock page are fully functional and great products for someone who doesn't mind a small imperfection for a discounted price. Tecnocraft does not accept returns on B stock items. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. 

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Radiator Duct 99-00 Civic is now available! Help prevent your engine from overheating by improving the airflow in your car. With the radiator duct, you are able to get the most cooling, which, in turn, help remove the heat off of your engine. The duct will force all the air to the radiator to create that efficient cooling for your engine.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Bumper Ducts are designed to serve multiple purposes based on your vehicle's needs. First, the bumper ducts can be used to route cool air to your braking system to keep your brakes from overheating in a race environment. Second, you can use the ducts to route cool air to your air intake system. Whatever purpose you use our ducts for, your vehicles our ducts will add an aggressive and unique look to the front end of our Civic product car!

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

If you are prepping your EK Civic for the track or you are just that hard core, then we have the perfect Dry Carbon Kevlar piece for you. The Password:JDM Dry Carbon Kevlar Aero Grille is the ultimate functional item for all the serious EK track junkies. With this product, PWJDM has deleted one of the unnecessary features of the EK while improving its frontal aerodynamics.

Let's face it, the EK isn't that far away from its older sibling, the EG6 or its cousin, the DC2. other than just aesthetics, why does the EK have an extra opening in the front? I mean seriously, its not any better for cooling and it's really counterproductive for aerodynamics. I have never seen an EG6 or DC2, both of which does not have an upper grille opening, suffer from any overheating issues. Add the Password:JDM Dry Carbon Kevlar Ram Air Scoop to complete the package!

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Carbon Kevlar Airbag Trays have been described as a work of art! We showed this off and everyone only had nice things to say! But to us, it's just another product that we should have made available a long time ago. Our Password:JDM Carbon Kevlar Airbag Trays are a direct replacement! It's perfect for those who choose to have their airbag removed for safety reasons on road courses or when drag racing.

Note: This version is specifically designed for right hand drive vehicles only.

Crafted from aerospace grade 2x2 twill Carbon Kevlar and 100% high solid epoxy resin, our bags trays are designed to fit the USDM vehicles without any modification to your stock dash. What this means is that you can retain your factory airbag and reinstall it later if you need to. The Password:JDM Carbon Kevlar Airbag Trays are truly plug & play! Installation takes less than 20 minutes and requires only the basic tools that every car enthusiast should have! A quality fit and finish are guaranteed.

The Password:JDM Carbon Kevlar Airbag Tray is a nice finishing touch to any vehicle that's show/race worthy. These are high quality pieces crafted here in the States. Like all of Password:JDM's products, these are produced one at a time. The exceptionally consistent quality you would expect from us is delivered each and every single time.

Available fitments:

EG '92-'95 Civic
EK '96-'00 Civic
DC '94-'01 Integra

Modifying, disconnecting, or removing airbag systems, components and/or hardware should only be done on vehicles used purely for race/show purpose only. In some countries, it is illegal to tamper or modify any portion of the supplemental restraint system (SRS). Please check with your local, state and/or federal laws pertaining to automotive SRS systems. Password does not assume any liability for damages resulting from the use of our Airbag trays. End users assumes all liabilities when using this product. Our Airbag trays are intended strictly for off-road racing use only!!!

Mounting requires the use of some sort of bonding agent such as double-sided tape along the edges or a silicon adhesive. Removal of the factory airbag (SRS) should be done by a trained and certified professional who knows how to disconnect the battery and SRS control unit prior to any airbag removal.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.