Carbon Fiber Seats

Carrying on a tradition of exceeding ALL expectations, Tecnocraft is proud to finally release our latest creation… a creation that embodies all the heart and spirit of the creative team here at Tecnocraft. This latest creation is the T2 line of Dry Carbon Seats. Spine formed to the back side of a normal torso, the Tecnocraft T2 line of seats is about as comfortable as it gets. There were no shortcuts made to get where we are today. Designing of this seat was out of necessity because the marketplace started to demand a more comfortable seat. Compared to the Tecnocraft T1, we shortened the lower thigh supports to allow a more comfortable entry/exit and added more support to the upper torso because it was needed.

Fiber             Kevlar

With over 25 years of professional race car composite fabrication experience, we have been building one off race seats for quite some time. Using all the technology that we have developed throughout the years, we have applied it to the Tecnocraft T2 line of seats. A totally new designed seat that’s a bit more forgiving and also more supportive than the Tecnocraft T1. We are offering the T2 seats in a standard version for the average body build and a larger version for the heavier set guys, the larger version will be known as the T2L. The Tecnocraft T2 is approx. 6.5lbs(3.0kgs) and the T2L is approx. 7.0lbs(3.2kgs).

The Tecnocraft T2 line of seats is constructed entirely of carbon fiber and/or carbon kevlar with aerospace grade stiffeners, reinforcements and the latest epoxy resins to obtain the lightest weight and yield the highest strength possible. We also incorporated a certain reinforcement material known as Vectran®. Vectran is a liquid crystal polymer fiber that is primarily used in aerospace and military where high strength is desired. Using the best material available is how Tecnocraft can excel and produce a high quality seat that’s both strong and light.

Given all the professional race technology and aerospace grade materials we have incorporated into the Tecnocraft T2 line, we are able to offer the strongest and lightest dry carbon fiber seats to the market. Given the fact that we have been commissioned to build one off seats for quite some time now, designing and creating the T2 was a fairly easy task here at Tecnocraft.

Available Options: 

- T2 carbon fiber front/carbon fiber back
- T2 carbon fiber front/carbon kevlar back
- T2 carbon kevlar front/carbon kevlar back
- Optional 3 piece seat pads (similar to the T1 seats)
- The Tecnocraft T2 is approx. 6.5lbs(3.0kgs)

Seat pads are available in both Black and Red Ultrasuede. Red is a Special ordered color).

SHIPPING NOTE:  Freight service required. Seats are unable to ship via USPS and UPS. Tecnocraft representatives will call you for the shipping estimate depending on the location.

Carrying on a tradition of exceeding ALL expectations, Tecnocraft is proud to finally release our latest creation… a creation that embodies all the heart and spirit of the creative team here at Tecnocraft. This latest creation is the T2 line of Dry Carbon Seats. Spine formed to the back side of a normal torso, the Tecnocraft T2 line of seats is about as comfortable as it gets. There were no shortcuts made to get where we are today. Designing of this seat was out of necessity because the marketplace started to demand a more comfortable seat. Compared to the Tecnocraft T1, we shortened the lower thigh supports to allow a more comfortable entry/exit and added more support to the upper torso because it was needed.

Fiber             Kevlar

With over 25 years of professional race car composite fabrication experience, we have been building one off race seats for quite some time. Using all the technology that we have developed throughout the years, we have applied it to the Tecnocraft T2 line of seats. A totally new designed seat that’s a bit more forgiving and also more supportive than the Tecnocraft T1. We are offering the T2 seats in a standard version for the average body build and a larger version for the heavier set guys, the larger version will be known as the T2L. The Tecnocraft T2 is approx. 6.5lbs(3.0kgs) and the T2L is approx. 7.0lbs(3.2kgs).

The Tecnocraft T2 line of seats is constructed entirely of carbon fiber and/or carbon kevlar with aerospace grade stiffeners, reinforcements and the latest epoxy resins to obtain the lightest weight and yield the highest strength possible. We also incorporated a certain reinforcement material known as Vectran®. Vectran is a liquid crystal polymer fiber that is primarily used in aerospace and military where high strength is desired. Using the best material available is how Tecnocraft can excel and produce a high quality seat that’s both strong and light.

Given all the professional race technology and aerospace grade materials we have incorporated into the Tecnocraft T2 line, we are able to offer the strongest and lightest dry carbon fiber seats to the market. Given the fact that we have been commissioned to build one off seats for quite some time now, designing and creating the T2 was a fairly easy task here at Tecnocraft.

Available Options: 

- T2 carbon fiber front/carbon fiber back
- T2 carbon Kevlar front/carbon fiber back
- T2 carbon fiber front/carbon Kevlar back
- Optional 3 piece seat pads (similar to the T1 seats)
- The Tecnocraft T2 is approx. 6.5lbs(3.0kgs)

Note:

• Seat pads are available in both Black and Red Ultrasuede. Red is a Special ordered color.

SHIPPING NOTE:  Freight service required. Seats are unable to ship via USPS and UPS. Tecnocraft representatives will call you for the shipping estimate depending on the location.

Tecnocraft's T3 seat platform is built on the success of our T2 line up. We designed our T3s to be chassis specific for the Lotus Elise, Exige, or Tesla Roadster. The T3 is purposefully made with emphasis on comfort and safety while also maintaining high strength and weight reduction. The Tecnocraft T3 seat weighs approx. 6.0lbs(2.73kgs).

Fiber             Kevlar

The Tecnocraft T3 line of seat requires nothing more than simple hand tools to install. It utilizes the factory seat rails and hardware for that simply brilliant concept known as plug and play! There is no required cutting, tucking, or replacing of the factory brackets or sliders. What it takes to install the Tecnocraft T3 seat into a 111 platform is simply to remove your OE seat assembly and replacing the factory seat with the T3. Plug the new assembly back in and go out and play as you desire with the most comfortable feel which truly redefines the “driving experience” that we all crave so much.

Designed with the same basic principles as our T2 line of seats, the Tecnocraft T3 is spine formed to backside of a normal torso and grafted into a double skinned Dry carbon seat shell. Using the latest aerospace materials combined with over 25 years of professional race car composite fabrication experience, we are able to produce a high quality seat specifically for the Lotus 111 platform. 

Just like the Tecnocraft T2 line of seats, the T3 line of seats are also constructed entirely of carbon fiber and/or carbon Kevlar with aerospace grade stiffeners, reinforcements and the latest epoxy resins to obtain the lightest weight and yield the highest strength possible. We also incorporated a certain reinforcement material known as Vectran®. Vectran is a liquid crystal polymer fiber that is primarily used in aerospace and military where high strength is desired. Using the best material available is how Tecnocraft can excel and produce a high quality seat that’s both strong and light.

Given all the professional race technology and aerospace grade materials we have incorporated into the Tecnocraft T2 and T3 line of seats, we are able to offer the strongest and lightest dry carbon fiber seats to the market. Given the fact that we have been commissioned to build one off seats for quite some time now, designing and creating the T3 line of seats was very gratifying for all of us here at Tecnocraft.

Features: 

- Spine formed for the ultimate in comfort
- 100% Dry Carbon Fiber/epoxy construction
- Utilizes factory “111” platform mounts/brackets/seat belts/hardware
- Ultra-light construction using Tecnocraft Dry Carbon mfg. technology
- 100% made in the USA here at Tecnocraft
- HANS device compatible( 3.0” spacing between the shoulder belt pockets)
- Additional provisions on seat back for optional rear back bracing
- Available in a combination of carbon fiber/carbon Kevlar options
- Optional 3 piece seat pads in Ultra Suede

Available Options: 

- T3 carbon fiber front/carbon fiber back
- T3 carbon Kevlar front/carbon fiber back
- T3 carbon fiber front/carbon Kevlar back
- Optional 3 piece seat pads (similar to the T1 seats)
 The Tecnocraft T3 is approx. 6.0lbs(2.73kgs).

Seat pads are available in both Black and Red Ultrasuede. Red is a Special ordered color).

SHIPPING NOTE:  Freight service required. Seats are unable to ship via USPS and UPS. Tecnocraft representatives will call you for the shipping estimate depending on the location.

T4 Dry Carbon Fiber Seats
Tapping into over 25 years of professional race car composite fabrication experience Tecnocraft presents the T4 line of seats. A totally new seat designed for comfort, safety and support. Our latest sport seat incorporates a wider shoulder area for increased upper body support, reducing driver fatigue while another feature is the larger cut-out provisions for the safety harness adding comfort for those drivers sporting a wider stance.

Fiber             Kevlar

The Tecnocraft T4 line of seats are constructed entirely of carbon fiber and/or carbon Kevlar with aerospace grade stiffeners, reinforcements and the latest epoxy resins to obtain the lightest weight and yield the highest strength possible. We also incorporated a certain reinforcement material known as Vectran®. Vectran is a liquid crystal polymer fiber that is primarily used in aerospace and military where high strength is desired. Using the best material available is how Tecnocraft can excel and produce a high quality seat that’s both strong and light. 

When you add up all the professional race technology and aerospace grade materials incorporated into the Tecnocraft T4 design, you'll quickly discover that the T4 is the strongest and lightest dry carbon fiber seat to the market. 

About:
For nearly two decades the Tecnocraft lineage, heritage, and experience has embraced a singular philosophy rivaling only that of Formula One, Military Defense, and Aerospace carbon composite manufacturing: "function over form". Tecnocraft brand products are specifically developed for the exotic aftermarket niche - a chosen challenge by our in-house design team to continually meet the demands and expectations of the most discerning consumers in the motorsport industry today.

Note:

• Seat pads are available in both Black and Red Ultrasuede. Red is a Special ordered color.
• Tecnocraft representatives will call you if there's any additional shipping cost depending on location.

Laser-cut from 3/16 Aluminum, these brackets are designed for Tecnocraft Seats.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Our Seat Washer and Spacer Kit is a perfect "fix-it" kit for those of you may have lost hardware that came with a seat from our line of Carbon Fiber Bucket Seats. It comes with a complete set to make sure you have enough pieces to mount your seat to the bracket with security and comfort made to your adjustments. Each of the spacers also features the Tecnocraft name on it for those of you that like to represent down to the smallest detail. 

Application: T2, T4, T5, T6

Parts List

• 4x Aluminum Red Washer
• 4x M8 Stainless Flat Hex Bolt
• 12x 1/8" Delrin Spacer 

 

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

These Seat Sliders are a universal fit to be used with our line of Carbon Fiber Bucket seats. They are used to adjust the driver's position to the steering wheel and pedals. Whether you needed these for an upcoming project, or as a replacement for a different car they are an essential for your aftermarket seats.  

Application: T2, T4, T5, T6

 

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

You trying to rep our logo at your next meet? Make sure to grab one of our License Plate Frames! This frame has our name on it, so people know you got some Carbon Fiber goods under the hood when you pull up. Easy to install (we hope you can do this), and instant flex points. 

Care instructions: Wash your car so you don't get a brown font on the Frame, and you'll be good to go.

Disclaimer: Your hand will become tired from pointing to your license plate frame constantly whenever people ask "Yo, where did you get those Carbon Fiber parts?". Please ask a medical professional for a wrist brace or splint. 

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Tecnocraft’s T5 seat offers drivers security and comfort while also being made of full Dry Carbon, making it incredibly lightweight and durable. The T5 sits at a total height of 34 1⁄2 inches and weighs 8lbs, a noticeable reduction from stock seats. The T5 is comparable to T4 with small increases in height, leg wall height, leg width space, an updated shoulder harness shape, and 2 seat support mounting points on the back of the seat. The T5 fits well in most builds without fitment issues, and gives your build an upgrade in interior presentation in full Dry Carbon with significant weight reduction compared to other bucket seats.

 

About:

For nearly two decades the Tecnocraft lineage, heritage, and experience has embraced a singular philosophy rivaling only that of Formula One, Military Defense, and Aerospace carbon composite manufacturing: "function over form". Tecnocraft brand products are specifically developed for the exotic aftermarket niche - a chosen challenge by our in-house design team to continually meet the demands and expectations of the most discerning consumers in the motorsport industry today.

Note:

• Hardware not included in pricing

• Seat pads are available in both Black and Red Ultrasuede. Red is a Special ordered color.

SHIPPING NOTE:  Freight service required. Seats are unable to ship via USPS and UPS. Tecnocraft representatives will contact you for the shipping estimate depending on the location.