Add that last finishing touch to your engine bay with these all new Password:JDM fender washers! Offered in anodized black, blue, gold, purple, red, gunmetal, silver, green, pink and orange these fender washers feature the Password:JDM Kenji logo. All Password:JDM fender washers are constructed from aircraft grade aluminum and are matched up with long lasting stainless steel bolts.

The Password:JDM Fender Washer Kits include 6Mx20 stainless steel bolts. The fender washers will fit any 10mm bolt hole under the hood of your Honda. The 6Mx20 bolts is recommended for all parts under your hood such as fenders, headlights, bumpers, etc.

Please note that each pack comes with 5 washers and bolts

**Only Authorized Seller For Password:JDM**


Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Here at Tecnocraft, we are all for showmanship and showing off hard work. With that in mind we created the BMW M3 / E9X  Dry Carbon Cabin Filter Covers. These fit over your cabin filters perfectly and are an incredibly good looking item to have under your hood. Whether you're just adding a Carbon touch to gain extra points at events, or you just want to show your engine bay some love, we 100% approve the addition of these to any E9X build. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Glorify every aspect of your E9X ///M3 engine bay by outfitting it with the Tecnocraft Right-Side Engine Bay Accessory Cover. This cover is designed to mirror and compliment the left side ENVY Intake Airbox Cover for a more complete and 'flooded' 100% Dry Carbon engine bay. It's bolt-on, simplistic design retains Immediate access to the coolant reservoir and oil cap, which are vital for on-the-go, quick fill-ups. 

Featuring:
- 100 % Dry Carbon Construction
- Covers unnecessary "clutter" in the immediate area
- Retains immediate coolant and oil access without removal
- Completes the look of the entire TECNOCRAFT ENVY Engine Bay accessories 
- Available in only a 1x1 weave. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Us here at Tecnocraft have developed 100% Dry Carbon headlight access covers to accentuate the E9X ///M3 under-the-hood area even further. With a range of colored Aluminum Fender Washers kits available to add with the access covers (find the Fender Washers here), onlookers will be quickly drawn to the detail in the pair of dry carbon access covers. 

Featuring:
- 100% Dry Carbon Construction
- Mold-formed to left and right headlight access areas
- Subtle, yet effective
- Installs into factory locations with included replacement hardware (black washers)
- Available in 1x1 and 2x2 weave

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

ENVY™ intake system is a direct drop-in replacement of the plastic OEM intake bridge on E9X ///M3s. With a more highly effective design versus factory, especially at speed, the ENVY’s RAM Air Scoop ensures that a large volume of air can be force fed into a starved intake system. Also, since the RAM Air Scoop is fabricated in 100% DRY CARBON the goal was to maximally enhance airflow dynamics conforming to the tight space tolerances behind the ///M3 kidney grilles. Rest assured this goal was achieved and the largest RAM Air Scoop in the market for the E9X ///M3s are now readily available.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

NOTE: This product is NOT legal for sale, installation, or use on a pollution-controlled vehicle in the state of California. This product is NOT CARB legal. Legal only for racing vehicles in closed course competitions which will never be driven on a public right of way. California orders will be canceled and refunded.

Revitalize your PasswordJDM part with a fresh, new badge.

You trying to rep our logo at your next meet? Make sure to grab one of our License Plate Frames! This frame has our name on it, so people know you got some Carbon Fiber goods under the hood when you pull up. Easy to install (we hope you can do this), and instant flex points. 

Care instructions: Wash your car so you don't get a brown font on the Frame, and you'll be good to go.

Disclaimer: Your hand will become tired from pointing to your license plate frame constantly whenever people ask "Yo, where did you get those Carbon Fiber parts?". Please ask a medical professional for a wrist brace or splint. 

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Tecnocraft Dry Carbon Fiber Universal Hood Vents, serve several, purpose like improved cooling by allowing hot air to exit the engine bay more efficiently.  Aerodynamics by reduced air pressure buildup in the engine compartment.

Dimensions: 

• Overall Length: (17.25in)
• Overall Width:(4.75in)
• Approximate Height: (2in)

NOTE: These vents do not include hardware and are not pre-drilled. These vents are sold as a pair.

ENVY™ intake system is a direct drop-in replacement of the plastic OEM intake bridge on E9X ///M3s. With a more highly effective design versus factory, especially at speed, the ENVY’s RAM Air Scoop ensures that a large volume of air can be force fed into a starved intake system. Also, since the RAM Air Scoop is fabricated in 100% DRY CARBON the goal was to maximally enhance airflow dynamics conforming to the tight space tolerances behind the ///M3 kidney grilles. Rest assured this goal was achieved and the largest RAM Air Scoop in the market for the E9X ///M3s are now readily available.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

NOTE: This product is NOT legal for sale, installation, or use on a pollution-controlled vehicle in the state of California. This product is NOT CARB legal. Legal only for racing vehicles in closed course competitions which will never be driven on a public right of way. California orders will be canceled and refunded.

Stage 3 of the ENVY™ intake system is a direct replacement of the factory airbox cover on E9X ///M3s. While we consider the factory intake box design made available by BMW to be sufficient, another necessary step in a complete ENVY™ intake system was development of an Enlarged Intake Cover without the many unnecessary points of intake turbulence while also increasing total airbox volume by 30%. Our Enlarged Intake Cover design carries charged air in greater volume from the Transition Chamber up and over the factory or BMC filter (optional) smoothly, hindering disruption from air filter structure as much as possible before reaching the ENVY™ ChargePipe. Factory fitment in a 100% Dry Carbon product was necessary to ensure hood scoop function remains available to the entire airbox as well.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

 Here at Tecnocraft, we are all for showmanship and showing off hard work. With that in mind we created the BMW M3 / E9X  Dry Carbon Cabin Filter Covers. These fit over your cabin filters perfectly and are an incredibly good-looking item to have under your hood. Whether you're just adding a Carbon touch to gain extra points at events, or you just want to show your engine bay some love, we 100% approve the addition of these to any E9X build. 

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The ENVY™ ChargePipe eliminates the final and most important chokepoint in air intake charge while dramatically reducing turbulent airflow. It's extremely organic 100% Dry Carbon design allows for the largest and smoothest transition of air from the entire intake system, complimenting even the factory E9X ///M3 intake system where it is most needed. The ChargePipe is our featured highlight product of the ENVY™ intake system and is suggested by TECNOCRAFT to be the first investment towards a complete ENVY™ intake system if purchased as a standalone product. The ENVY™ ChargePipe has been specifically paired with a BMC filter as a perfect combination upgrade for the most noticeable throttle response, horsepower and torque gains of the entire ENVY™ system.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

NOTE: This product is NOT legal for sale, installation, or use on a pollution controlled vehicle in the state of California. This product is NOT CARB legal. Legal only for racing vehicles in closed course competitions which will never be driven on a public right of way. California orders will be canceled and refunded.