R35

Add that last finishing touch to your engine bay with these all new Password:JDM fender washers! Offered in anodized black, blue, gold, purple, red, gunmetal, silver, green, pink and orange these fender washers feature the Password:JDM Kenji logo. All Password:JDM fender washers are constructed from aircraft grade aluminum and are matched up with long lasting stainless steel bolts.

The Password:JDM Fender Washer Kits include 6Mx20 stainless steel bolts. The fender washers will fit any 10mm bolt hole under the hood of your Honda. The 6Mx20 bolts is recommended for all parts under your hood such as fenders, headlights, bumpers, etc.

Please note that each pack comes with 5 washers and bolts

**Only Authorized Seller For Password:JDM**


Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Revitalize your PasswordJDM part with a fresh, new badge.

PasswordJDM Limited Re-Release License Plate Frame – Back by Popular Demand!
Missed out the first time? Now’s your chance! The PasswordJDM License Plate Frame is back for a limited re-release, giving die-hard JDM enthusiasts another shot at securing this iconic accessory. 

You trying to rep our logo at your next meet? Make sure to grab one of our License Plate Frames! This frame has our name on it, so people know you got some Carbon Fiber goods under the hood when you pull up. Easy to install (we hope you can do this), and instant flex points. 

Care instructions: Wash your car so you don't get a brown font on the Frame, and you'll be good to go.

Disclaimer: Your hand will become tired from pointing to your license plate frame constantly whenever people ask "Yo, where did you get those Carbon Fiber parts?". Please ask a medical professional for a wrist brace or splint. 

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Gurney Flap and Wickerbill is a short lip that protrudes upward from the upper trailing edge of the 2011-2021 Nissan R35 GTR's factory spoiler / Password:JDM Dry Carbon Fiber Elevated Rear Spoiler. It’s used to enhance the wing’s down-force characteristics by separating the airflow on the back side of the wing, primarily that which comes over the top of the wing. The result creates a localized high-pressure zone on the top side of the wing generating down-force.

When used in conjunction with a functional front splitter and canards, you will be able to enhance the overall aerodynamic characteristics of your GT-R.

Note: Our Gurney Flap is compatible with both the OEM spoiler and the Password:JDM Dry Carbon Fiber Elevated Rear Spoiler. This item does not fit on the Black Edition or Track Edition models. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 10-14 business days from the original purchase date. Due to high demand.

Tecnocraft Dry Carbon Fiber Universal Hood Vents, serve several, purpose like improved cooling by allowing hot air to exit the engine bay more efficiently.  Aerodynamics by reduced air pressure buildup in the engine compartment.

Dimensions: 

• Overall Length: (17.25in)
• Overall Width:(4.75in)
• Approximate Height: (2in)

NOTE: These vents do not include hardware and are not pre-drilled. These vents are sold as a pair.

I love the GTR… you guys probably know that by now. It’s the ultimate supercar for the price… for 80k here in the states… what more could you ask for? I love the way it looks; I love the way it drives; I love the way it feels… what I don’t like is all that plastic. It really takes the WOW factor away from the car. If you don’t agree with me, pop the hood and you’ll know what I am talking about. There is more plastic in this car than any other car in the same price range. PWJDM is about to change that! Introducing the PWJDM Dry CF GTR Engine Compartment covers. They will complement the engine bay perfectly and bring more attention to your GTR.

Made of Dry CF, the PWJDM Dry CF GTR Engine Compartment Covers fits perfectly. We redesigned these pieces a bit to give them more shape. We also took the time to delete the access doors since removing these for access really only takes 30 secs. The initial installation takes only 5 mins and requires absolutely no cutting or drilling at all. These lightweight and rigid PWJDM Dry CF GTR Engine Compartment Covers will set off your engine bay perfectly!

• Perfect mod for the engine bay
• Dry CF construction
• Made in the USA
• Perfect fit and finish
• Easy install, no cutting or drilling required

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

It gets pretty hot under the GTR bonnet, so we made this Dry Carbon Fiber Radiator Cooling Panel to combat the heat. Besides reducing as much weight as possible from the OEM piece, it looks brilliant. By utilizing our exclusive epoxy resin, we can get a shiny finish through polishing, and not clear coating like the other guys. Clear coat adds unnecessary weight, so we left it out. If you look at the OEM rear under-tray diffuser, you’ll see even Nissan didn’t clear-coat their carbon piece for the same reason. This cooling plate also reduces turbulent air from going over the radiator and into the engine bay, so all the air is forced through the radiator maximizing its cooling effectiveness.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The complexities of molding a panel which is essentially carpet on top of cardboard without destroying it was not very fun. Nor was it easy, but here at Password:JDM, we were still able to get this completed with the processes that we have developed in house. All of this was done in less than a week. The agenda was to produce a piece that's adds volumes in terms of looks to GTR and keep everything very tasteful. I honestly say it was mission accomplished here at Password:JDM.

The Password:JDM Dry Carbon Fiber Rear Speaker Shelf is truly a work of art. This is the one interior piece that's most visible from the exterior. Stand anywhere near the rear of the vehicle, and the Password:JDM Dry Carbon Fiber Rear Speaker Shelf demands your attention. The eye-popping detail in this piece is more than just skin deep. It maintains a consistent thickness of .045" throughout the entire surface. It weighs approximately 1 pound and mounts perfectly by sandwiching between the stock shelf and the speaker grilles. Installation takes only 5 minutes once you have the factory shelf removed. There is absolutely no rattle, shake, or extra noises of any kind once installed. All hardware for installation is supplied as well.

The Password:JDM Dry Carbon Fiber Rear Speaker Shelf is being offered with or without (as shown here) rear seat belt cutouts. This is because our next product will be the Dry Carbon Fiber Rear Seat Deletes, and you guessed it, Dry Carbon Fiber as always!

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat

Planted Seat Brackets are laser cut from 3/16 inch thick steel and hand welded to ensure weld penetration for superior strength. They are finished with a black powder coat and applications are available for many vehicles

Handling Time:

• All orders will ship complete once all items are ready.
• Seat Brackets are made to order and will ship in 7-10 days or sooner.

DISCLAIMERS

• Seats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components.
• Many vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat. 
• Replacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work & which resistor to use.
• Professional installation is recommended.
• By completing a purchase you acknowledge reading the above disclaimers as well as our Disclaimer page.

Introducing the PWJDM GT-R Wide Front Fenders

The GT-R is an incredible machine, but it’s no secret that it suffers from “understeer,” especially when more power is added. Let’s face it—how can we ever leave "well enough" alone? While there’s nothing wrong with keeping a stock GT-R—it easily outperforms cars three times its MSRP in its factory form—that’s just not how we roll at PWJDM. Especially for someone like me, leaving a car untouched is simply not an option. The GT-R is no exception.

Here’s where we’ve taken things up a notch: we’re proud to introduce the PWJDM GT-R Wide Front Fenders. Extended by a full 38mm and significantly lighter than stock, these fenders were designed to accommodate 20x11 wheels wrapped in 315/30/20 Toyo R888 tires. These are the widest tires available for the rear of a stock GT-R, so naturally, we had to create fenders to fit them up front as well. Being an AWD car, it only makes sense to run the same tires on all four corners. With the PWJDM GT-R Wide Front Fenders, you can confidently take corners faster, knowing your car can handle the challenge. For any GT-R driver serious about performance, wider fenders for wider tires are an absolute must.

Constructed entirely of dry carbon and reinforced with Kevlar to protect against road debris, the PWJDM GT-R Wide Front Fenders are the ultimate upgrade for any GT-R, whether you’ve added power upgrades or not. The benefits of larger front tires are immediately noticeable. There’s simply nothing like this available anywhere else. After 200+ days of development, every aspect of these fenders—performance, aerodynamics, aesthetics, and functionality—has been meticulously thought out.

While aggressive in concept, these wide fenders maintain a subtle, factory-inspired appearance. The deepened side vents help alleviate high-pressure buildup inside the fender well at increased speeds, enhancing performance. The front wheel arches blend seamlessly with the rear quarters, making the fenders look like they were part of the car’s original design.

To ensure a clean and sleek finish, we’ve also designed a bumper extension that eliminates the front side markers. Given how difficult and expensive clear side markers are to source, we engineered these fenders to remove that hassle entirely. The PWJDM Wide Front Fenders and bumper extensions are sold in bare dry carbon, ready for refinishing and prep work (painting).

Installation Notes:
While installation isn’t overly complex, it’s best left to a professional body shop. The fit and finish are exact, thanks to our tight tolerances. We’ve intentionally undersized the mounting holes, allowing them to be adjusted with a drill or rotary tool for a perfect fit. Once installed, these fenders will fit your GT-R like a glove.

- Ultra light Dry carbon Construction
- Kevlar Reinforced 1-piece single op produced.
- 38mm wider and lighter than stock
- Accommodates 315/30-20 R888 on 20x11 without the need for spacers
- Includes matching bumper extensions
- Matches and flows well with the rear quarter panels
- Deletes front side markers
- Addresses the “understeer” issues with the GT-R

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Fitment on the Lip: 2009-2011, 2012-2020 without Nismo R35 GTR

If you haven't heard yet, the loud ass word on the street is that we've got the best damn GTR front lip out there - modular to many other add-ons (including dry carbon brake ducts!), aggressive, and absolutely 100% Dry Carbon MADE IN THE USA. Function meets form in Password:JDM's Ultimate Front Lip Spoiler for the Nissan GTR (R35).

For all the times you were worried about the roadkill you just ran over, the lip is constructed of honeycomb matrix on its underside, strength tested with baseball bats (no, seriously...), and is ready to survive your mad driving skills on and off the track. Keep the lip in tip-top shape and ask for the Lexan® skid pads and a set of extra washers to change out just in case ;).

And you're a self-proclaimed track star, right? Keep it COOL with the addition of the PWJDM Dry Carbon Brake Duct Mod (optional to the Ultimate Lip). These babies duct all the cool air you're scooping up at high speeds and funnel it directly onto your brake calipers, so why the hell not? Reduce brake fade the right way with these weekend add-ons!

Features:
- 100% Dry Carbon Construction - MADE IN THE USA
- HMR - Honeycomb Matrix Reinforced Construction
- Lightweight (8.5lbs bare) and SUPER STRONG...hell, we've taken a baseball bat to it!
- Dry Carbon Fin Strakes come STANDARD

Modular Additions:
- 100% Dry Carbon Reversible Center Extension (2x2 Carbon, Kevlar)
- PWJDM 100% Dry Carbon Brake Ducts (come in a pair, shave to fit offsets!)
- Lexan® Scrape Shield Skidplates and Extra Washers (for the times you got too damn low)

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

We take the Nissan GTR seriously and set a goal to reduce as much weight from it as possible with our family of dry carbon products. The Password:JDM Dry Carbon Fiber Intake Manifold Cover is 100% hand-made here in California with our top-quality carbon fiber and special UV resistant epoxy resin that gives strength and durability. This cover becomes the centerpiece of attention whenever you open your hood. Bring on the ooohhhhs and ahhhhhs by matching your GTR’s exotic performance with this exotic intake manifold cover.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Gurney Flap and Wickerbill is a short lip that protrudes upward from the upper trailing edge of the 2011-2021 Nissan R35 GTR's factory spoiler / Password:JDM Dry Carbon Fiber Elevated Rear Spoiler. It’s used to enhance the wing’s down-force characteristics by separating the airflow on the back side of the wing, primarily that which comes over the top of the wing. The result creates a localized high-pressure zone on the top side of the wing generating down-force.

When used in conjunction with a functional front splitter and canards, you will be able to enhance the overall aerodynamic characteristics of your GT-R.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Note: Our Gurney Flap is compatible with both the OEM spoiler and the Password:JDM Dry Carbon Fiber Elevated Rear Spoiler. This item does not fit on the Black Edition or Track Edition models. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 10-14 business days from the original purchase date. Due to high demand.

The Password:JDM Dry Carbon Fiber Sill Panels is the perfect "entry" mod for those of you who would like to have a taste of Dry Carbon Fiber. It’s very clean and is something you can appreciate every time you open your doors. Some people would like the red-carpet treatment when they step out somewhere. As for me being a true car enthusiast, i'll take Dry Carbon any day! This is what was delivered here with the Password:JDM Dry Carbon Fiber GTR Sill Panels. Step out in style and delete some of that plastic that's very common with the GTR. You'll be reducing a bit of weight as well with this mod. The Password:JDM Dry Carbon Fiber Sill Panels take less than 5 minutes to install once you have the factory rocker panels removed.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

 

Tecnocraft Dry Carbon Fiber Universal Hood Vents, serve several, purpose like improved cooling by allowing hot air to exit the engine bay more efficiently.  Aerodynamics by reduced air pressure buildup in the engine compartment.

Dimensions: 

• Overall Length: (17.25in)
• Overall Width:(4.75in)
• Approximate Height: (2in)

NOTE: These vents do not include hardware and are not pre-drilled. These vents are sold as a pair.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

The complexities of molding a panel which is essentially carpet on top of cardboard without destroying it was not very fun. Nor was it easy, but here at Password:JDM, we were still able to get this completed with the processes that we have developed in house. All of this was done in less than a week. The agenda was to produce a piece that's adds volumes in terms of looks to GTR and keep everything very tasteful. I honestly say it was mission accomplished here at Password:JDM.

The Password:JDM Dry Carbon Fiber Rear Speaker Shelf is truly a work of art. This is the one interior piece that's most visible from the exterior. Stand anywhere near the rear of the vehicle, and the Password:JDM Dry Carbon Fiber Rear Speaker Shelf demands your attention. The eye-popping detail in this piece is more than just skin deep. It maintains a consistent thickness of .045" throughout the entire surface. It weighs approximately 1 pound and mounts perfectly by sandwiching between the stock shelf and the speaker grilles. Installation takes only 5 minutes once you have the factory shelf removed. There is absolutely no rattle, shake, or extra noises of any kind once installed. All hardware for installation is supplied as well.

The Password:JDM Dry Carbon Fiber Rear Speaker Shelf is being offered with or without (as shown here) rear seat belt cutouts. This is because our next product will be the Dry Carbon Fiber Rear Seat Deletes, and you guessed it, Dry Carbon Fiber as always!

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Take your Password:JDM Ultimate Front Lip setup to the next level with the Password:JDM Dry Carbon Reversible Center Extension — a purpose-built add-on designed to complement and complete the Ultimate Front Lip on the R35 Nissan GT-R.

Crafted from genuine carbon fiber, this center extension pairs seamlessly with the Ultimate Front Lip to fill in the center section for a more aggressive, cohesive front-end appearance. The reversible design gives you flexibility over how the carbon weave faces, so you can tailor the finish to match your build — whether you prefer a high-gloss statement or a subtle matte look.

Designed exclusively as a companion piece to the Password:JDM Ultimate Front Lip, this extension is the finishing touch that transforms a great front end into a complete, track-ready package.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

 

Replacement bumper extension for PasswordJDM Carbon Fiber Nissan R35 GTR Wide Fender.  

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

We take the Nissan GTR seriously and set a goal to reduce as much weight from it as possible with our family of dry carbon products. The Password:JDM Dry Carbon Fiber Intake Manifold Cover is 100% hand-made here in California with our top-quality carbon fiber and special UV resistant epoxy resin that gives strength and durability. This cover becomes the centerpiece of attention whenever you open your hood. Bring on the ooohhhhs and ahhhhhs by matching your GTR’s exotic performance with this exotic intake manifold cover.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

I love the GTR… you guys probably know that by now. It’s the ultimate supercar for the price… for 80k here in the States… what more could you ask for? I love the way it looks; I love the way it drives; I love the way it feels… what I don’t like is all that plastic. It takes the WOW factor away from the car. If you don’t agree with me, pop the hood and you’ll know what I am talking about. There is more plastic in this car than any other car in the same price range. PWJDM is about to change that! Introducing the PWJDM Dry CF GTR Engine Compartment covers. They will complement the engine bay perfectly and bring more attention to your GTR.

Made of Dry CF, the PWJDM Dry CF GTR Engine Compartment Covers fit perfectly. We redesigned these pieces a bit to give them more shape. We also took the time to delete the access doors since removing these for access only takes 30 secs. The initial installation takes only 5 minutes and requires absolutely no cutting or drilling at all. These lightweight and rigid PWJDM Dry CF GTR Engine Compartment Covers will set off your engine bay perfectly!

• The perfect mod for the engine bay
• Dry CF construction
• Made in the USA
• Perfect fit and finish
• Easy install, no cutting or drilling required

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in the weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Introducing the world's first dry carbon fiber Nissan GT-R trunk manufactured by Password:JDM. This trunk is made with our high quality dry carbon fiber material, it retains the original shape of the Nissan GT-R trunk so fitment is OEM quality, but reduce the overall weight of the original trunk. This Password:JDM exclusive trunk for the Nissan GT-R weighs in at 5lbs. and we were able get the weight down by utilizing our exclusive epoxy resin process to artfully form the dry carbon fiber to the masterpiece you see here. The resin gives off a natural shine without the use or weight of clear coating. This trunk retains all the original mounting points, drill holes and bracing for attachments of the trunk release, dampers, and the original rear wing.

Every Password:JDM R35 GT-R Dry Carbon Fiber Trunk features an edge burn clear coat premium finish. The true to form process of applying multiple layers of UV protected clear coat to retain the factory shine matching the other GT-R panels will provide a OEM factory look to the lighter dry carbon fiber piece.

Note - Tecnocraft representatives will call you if there's any additional shipping cost depending on location.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

When developing a true function-over-form product for the R35 GTR, sometimes the end-result happens to be extremely aesthetically pleasing as well! We had to put our thinking caps on when bringing a real “game changer” rear seat delete alternative to market… the premise for the design and build was to delete the rear seat and delete all the stuff required for the rear seats. this premise came about since we find the factory rear seats near useless by design. there was hardly any leg room, so why even bother. reducing as much weight as possible without making this car look bare and naked has been our agenda since day one. The PWJDM Rear Seat Delete project has followed this directive to a T.

To maintain and forever perpetuate the infamous PWJDM baller reputation, we definitely had to build them out of 100% dry carbon fiber and mold them to fit both the body and the car like a glove. Building upon the successes of the Tecnocraft ‘T1' racing seats (http://www.tecnocraft.com) from the premium side of Password Industries, Inc. We also kept in mind the interior “race bucket seat” theme and wanted a continuation of this effort for the rear seat deletes. what’s shown here is a true testament to PWJDM’s commitment to the platform as well as our abilities as a true tuner and developer of great products.

The first thing to notice would be the organic curvature of the rear seat delete, which provides structural strength and rigidity over just a simple flat design. Secondly, they have been molded in such a way to provide a tight, drop-in fit, and have eliminated the rear passenger seatbelt hardware – yes, you are correct, this weight-saving upgrade is strictly for off-road use only!

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

These lightweight Dry Carbon Fiber NACA ducts feature larger air inlet openings to direct a larger volume of air under the hood. They will in turn provide better cooling efficiency for the turbos and engine underneath the hood. These top quality NACA ducts, like all of our dry carbon fiber products, are 100% hand-made with our high-quality dry carbon fiber and special UV resistant epoxy resin.

All Password:JDM R35 GTR Dry Carbon Fiber Naca Ducts features an edge burn clear coat premium finish. The true to form process of applying multiple layers of UV protected clear coat to retain the factory shine matching the other GTR panels will provide a OEM factory look to the lighter dry carbon fiber piece.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Introducing the world's first true dry carbon fiber Nissan GT-R hood developed by Password:JDM. It's no secret, lighter cars do go faster (stop that much quicker as well) ... and by reducing the weight up from top, it also lowers your car's center of gravity, making it corner that much better. This dry carbon hood retains the original shape but reduced the overall weight by utilizing our state-of-the-art manufacturing process and race quality dry carbon fiber to scale in under 15lbs. Password:JDM is the first to market a weight reduction initiative for the all-new Nissan GTR and this hood is the first item of many products release to achieve that goal. Our product line is designed with form and function since it retains the original dimensions set forth by Nissan for the introduction of the GT-R to North America.

Every Password:JDM R35 GTR Dry Carbon Fiber Hood features an edge burn clear coat premium finish. The true to form process of applying multiple layers of UV protected clear coat to retain the factory shine matching the other GT-R panels will provide a OEM factory look to the lighter dry carbon fiber piece.

Installation Guide:
Click here to download the installation guide in .pdf format (444 KB)

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Password:JDM's R35 Rear Spoiler is a sleek addition to your R35. This spoiler sits slightly higher than your OEM spoiler giving your build a look to set you apart from the rest. Made of dry Carbon Fiber, this spoiler weighs significantly less than clear coated versions of this wing. 

Our spoiler features full dry carbon fiber construction, 60mm elevated height, slight offset towards the rear of the car, and integrated third brake light.

100% hand made in the USA!

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Upgrade and replace the Factory Nissan 'Carbon Mats' with true Dry Carbon Floor Mats from Password:JDM! Our Dry Carbon Floor Mats are extremely durable, and high strength. High-heel safe! 100% molded to GTR driver and passenger footwell and 'lock' into place once installed and includes integrated rubber edge liner. Only weighs 2.5lbs each side!

Installation:
- Slide the seat all the way back, drop the mats in, and roll.
- Removal of carpet mats required, install on top of bare interior carpet

Note:These will not fit the 2014 model.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

It’s a known fact, that engines will make more power if you can somehow draw in colder outside air. This is exactly what the PWJDM Ram Air Induction Snorkel was designed to do. Ram Air induction Snorkels are nothing new… they have been utilized in professional racing for the last 30 or so years in almost every series from LM to F1. Looking to professional racing for inspiration, PWJDM even recruited a few master fabricators from professional racing… their main purpose was to design and produce Ram Air Induction Snorkels for a few of the most successful racing teams here on the west coast… now, they are an integral part of the R&D and production team here at PWJDM.

By directly feeding colder outside air into your stock airbox, the PWJDM Ram Air Induction Snorkel will do wonders for your GTR. At increased speeds, it maintains positive pressure in front of the filter… ramming as much colder air into your intake. This principle alone is what this Ram Air Induction Snorkels are all about. It isn't exactly rocket science... more colder air in, more HP period. By working within the confinements of the stock air box and keeping within CARB compliance, we were able to utilize our expertise and develop a Ram Air Induction Snorkel that perfectly compliments a stock air box and dramatically increases horsepower at increased speeds. It isn't exactly rocket science, but it isn't all that difficult to comprehend either. Getting colder, denser air into your engine makes more horsepower.

• Race proven Ram Air Induction methodology utilized in design
• Directly forces colder air into your stock intake
• Increases Horsepower
• Weighs under 4oz/side
• CARB compliant

Installation Instructions:
Click here to download the install notes in .pdf format (256kb)

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Canards for the 2008+ R35 Nissan GTR will generate down-force on the front end to help stabilize your vehicle at high speeds. With the use of a functional front splitter, you can balance the amount of down-force required as per your setup and application per racetrack.

This Password:JDM Canards include an edge burn clear coat premium finish. The true to form process of applying multiple layers of UV protected clear coat to retain the factory shine matching the other body panels will provide an OEM factory look to the lighter dry carbon fiber piece.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.