B Stock

Revitalize your PasswordJDM part with a fresh, new badge.

The Password:JDM Carbon Fiber Airbag Trays have been described as a work of art! We showed this off and everyone only had nice things to say! But to us, it's just another product that we should have made available a long time ago. Our Password:JDM Carbon Fiber Airbag Trays are a direct replacement! It's perfect for those who choose to have their airbag removed for safety reasons on road courses or when drag racing.

Crafted from aerospace grade 2x2 twill Carbon Fiber and 100% high solid epoxy resin, our bags trays are designed to fit the USDM vehicles without any modification to your stock dash. What this means is that you can retain your factory airbag and reinstall it later if you need to. The Password:JDM Carbon Fiber Airbag Trays are truly plug & play! Installation takes less than 20 minutes, and requires only the basic tools that every car enthusiast should have! A quality fit and finish is guaranteed.

The Password:JDM Carbon Fiber Airbag Tray is a nice finishing touch to any vehicle that's show/race worthy. These are high quality pieces crafted here in the States. Like all of Password:JDM's products, these are produced one at a time. The exceptionally consistent quality you would expect from us is delivered each and every single time.

Fitments:
DC '94-'01 Integra (U.S. Left Hand Drive)

Modifying, disconnecting, or removing airbag systems, components and/or hardware should only be done on vehicles used purely for race/show purpose only. In some countries, it is illegal to tamper or modify any portion of the supplemental restraint system (SRS). Please check with your local, state and/or federal laws pertaining to automotive SRS systems. Password does not assume any liability for damages resulting from the use of our Airbag trays. End users assumes all liabilities when using this product. Our Airbag trays are intended strictly for off-road racing use only!!!

Mounting requires the use of some sort of bonding agent such as double sided tape along the edges or a silicon adhesive. Removal of the factory airbag (SRS) should be done by a trained and certified professional who knows how to disconnect the battery and SRS control unit prior to any airbag removal.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer:
All Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a finger print, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable. Such minor imperfections are race industry standard and considered acceptable. Therefore it is NOT considered to be defective.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item is a special order and will ship out 2-3 weeks from the original purchase. Please contact support@tecnocraftcomposites.com to special order.

Part of modding your car is making it look good, and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM dry carbon fiber fuse box over-cover for the 1992-2000 Honda Civic / 1994-2001 Acura Integra adheres to your stock fuse box cover and will help clean up the look of your engine bay making your engine stand out, while adding a much-needed accent to the scene.

Like all of the dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Disclaimer: Tecnocraft Composites and Password:JDM's B Stock items are items that didn't quite pass our quality standards. The items on the B Stock page are fully functional and great products for someone who doesn't mind a small imperfection for a discounted price. Tecnocraft does not accept returns on B stock items. 

Note: The Password:JDM Dry Carbon Fiber Fuse Box Over Cover fits over the factory part and is adhered with double-side tape.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

You trying to rep our logo at your next meet? Make sure to grab one of our License Plate Frames! This frame has our name on it, so people know you got some Carbon Fiber goods under the hood when you pull up. Easy to install (we hope you can do this), and instant flex points. 

Care instructions: Wash your car so you don't get a brown font on the Frame, and you'll be good to go.

Disclaimer: Your hand will become tired from pointing to your license plate frame constantly whenever people ask "Yo, where did you get those Carbon Fiber parts?". Please ask a medical professional for a wrist brace or splint. 

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Gurney Flap / Wickerbill is a short lip that protrudes upward from the upper trailing edge of the 2012-2013 Civic Si 2DR's factory wing. It’s used to enhance the wing’s down-force characteristics by separating the airflow on the back side of the wing, primarily that which comes over the top of the wing. The result creates a localized high-pressure zone on the top side of the wing generating down-force.

When used in conjunction with a functional front splitter and canards, you will be able to enhance the overall aerodynamic characteristics of your 2012+ Civic Si 2DR.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your EK Civic's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Fiber Cooling Plate for the 96-00 Honda Civic to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon versions.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Disclaimer: Tecnocraft Composites and Password:JDM's B Stock items are items that didn't quite pass our quality standards. The items on the B Stock page are fully functional and great products for someone who doesn't mind a small imperfection for a discounted price. Tecnocraft does not accept returns on B stock items. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM dry carbon fiber ECU over-cover for the 2006-2011 Honda Civic adheres to your stock ECU and will help clean up the look of your engine bay making your engine stand out, while adding a much-needed accent to the scene.

Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Note: The Password:JDM Dry Carbon Fiber ECU Over Cover fits over the factory part and is adhered with double side tape.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

• Quick 10-minute install
• Super light dry carbon cover

Please note that we highly recommend you purchase this with our Passwordjdm Fender Washer Kit as we have found that the OEM hardware does not install very well with our cooling plate.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Gurney Flap / Wickerbill is a short lip that protrudes upward from the upper trailing edge of the Integra Type-R's factory wing. It’s used to enhance the wing’s down-force characteristics by separating the airflow on the back side of the wing, primarily that which comes over the top of the wing. The result creates a localized high pressure zone on the top side of the wing generating down-force.

When used in conjunction with a functional front splitter / canards, you will be able to enhance the overall aerodynamic characteristics of your Integra Type-R 2DR.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Gurney Flap / Wickerbill is a short lip that protrudes upward from the upper trailing edge of the JDM 2002-2006 Integra Type-R's factory wing. It’s used to enhance the wing’s down-force characteristics by separating the airflow on the back side of the wing, primarily that which comes over the top of the wing. The result creates a localized high pressure zone on the top side of the wing generating down-force.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Engine Compartment Covers for the 2013-2020 Subaru BRZ / Scion FR-S sit at the top corners of your engine bay. They do a very nice job of making the engine bay cleaner and look more organized. The Compartment Covers also give anyone standing on the side of your engine bay something to look at until they can get to the front of your engine bay.

Note: Installation of this product may require you to drill one hole into the plastic lining. 

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Disclaimer: Tecnocraft Composites and Password:JDM's B Stock items are items that didn't quite pass our quality standards. The items on the B Stock page are fully functional and great products for someone who doesn't mind a small imperfection for a discounted price. Tecnocraft does not accept returns on B stock items. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM dry carbon fiber fuse box over-cover for the 2006-2011 Honda Civic adheres to your stock fuse box cover and will help clean up the look of your engine bay making your engine stand out, while adding a much-needed accent to the scene.

Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Note: The Password:JDM Dry Carbon Fiber Fuse Box Over Cover fits over the factory part and is adhered with double side tape.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Fuse Box over-cover for the 2000-2009 Honda S2000 adheres to your stock fuse box cover, making it a fast and easy installation. Within minutes add some pizzazz to the factory’s rats' nest of an engine bay. The Carbon Fiber will help add some much-needed accents and stand out amongst the crowd. Go ahead and pop your hood so you can see the nod of approval from the crowd, you know, it’s the one that says: “this person knows what they’re doing”. 

Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Note: The Password:JDM Dry Carbon Fiber Fuse Box Over Cover fits over the factory part and is adhered with double side tape.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber ABS/Power Steering Shield 2015-2021 Subaru WRX STi will clean up the look of your engine bay! Our ABS/Power Steering Cover mounts using the factory mounting points. This will fit only the STi models.

Like all of our Dry Carbon Kevlar parts we manufacture, this Power Steering Shield cover has been precision crafted for a perfect fitment every time. We have used a fade-resistant resin during the manufacturing process to ensure this cover will always look & function as good as the day you bought it!  

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Presenting yet another Password:JDM exclusive! Here are our new Password:JDM Carbon Fiber Fuel Pump Covers! You will NOT find these anywhere else! These carbon fiber fuel pump covers are a direct replacement. For those of you who have taken out your rear seats, these will definitely add some style to that dull "gutted out" look. All Password:JDM carbon fiber products are made from the finest grade "A" carbon fiber available. Each fuel pump cover is protected with a UV coating that will allow the piece to hold its high gloss finish. Password:JDM carbon fiber products have a tight carbon weave.

This application will fit all:
1994-2001 DC Integra Hatchback
1994-2001 DC Integra Sedan

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Looking to add some Carbon Fiber to your engine bay? The Password:JDM Dry Carbon Fiber Coil Pack sits right on top of your engine and is an easily installed part. If you pop the hood of your car often and have other carbon fiber goods on your build this part will continue to add style points. It sits flush on top and covers your spark plugs with a sleek Carbon Fiber look. Just remember if you win any trophies, you can thank us via email.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in the weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand-crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standards and considered acceptable.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Are you building a track monster out of your 96-00 Civic? Upgrading your OG cluster to a digital one? When you rip out the OEM cluster there's going to be a lot of space to fill and hold in your new display. Password:JDM's Dry Carbon Cluster Delete helps you fill that void and gives you an area to mount on. 

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Disclaimer: Tecnocraft Composites and Password:JDM's B Stock items are items that didn't quite pass our quality standards. The items on the B Stock page are fully functional and great products for someone who doesn't mind a small imperfection for a discounted price. Tecnocraft does not accept returns on B stock items. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. 

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Gurney Flap / Wickerbill is a short lip that protrudes upward from the upper trailing edge of the Mitsubishi Lancer Evolution X's factory spoiler. It’s used to enhance the wing’s down-force characteristics by separating the airflow on the back side of the wing, primarily that which comes over the top of the wing. The result creates a localized high pressure zone on the top side of the wing generating down-force.

When used in conjunction with a functional front splitter / canards, you will be able to enhance the overall aerodynamic characteristics of your EVOX.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Disclaimer: Tecnocraft Composites and Password:JDM's B Stock items are items that didn't quite pass our quality standards. The items on the B Stock page are fully functional and great products for someone who doesn't mind a small imperfection for a discounted price. Tecnocraft does not accept returns on B stock items. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM dry carbon fiber fuse box over-cover for the 2002-2005 Honda Civic Si / 2002-2006 Acura RSX adheres to your stock fuse box cover and will help clean up the look of your engine bay making your engine stand out, while adding a much-needed accent to the scene.

Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Note: The Password:JDM Dry Carbon Fiber Fuse Box Over Cover fits over the factory part and is adhered with double side tape.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM dry carbon fiber fuse box over-cover for the 2012-2015 Honda Civic adheres to your stock fuse box cover and will help clean up the look of your engine bay making your engine stand out, while adding a much-needed accent to the scene.

Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Gurney Flap / Wickerbill is a short lip that protrudes upward from the upper trailing edge of the 99-00 Civic Si factory wing. It’s used to enhance the wing’s down-force characteristics by separating the airflow on the back side of the wing, primarily that which comes over the top of the wing. The result creates a localized high pressure zone on the top side of the wing generating down-force.

When used in conjunction with a functional front splitter / canards, you will be able to enhance the overall aerodynamic characteristics of your EM1 Civic Si 2DR.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Disclaimer: Tecnocraft Composites and Password:JDM's B Stock items are items that didn't quite pass our quality standards. The items on the B Stock page are fully functional and great products for someone who doesn't mind a small imperfection for a discounted price. Tecnocraft does not accept returns on B stock items. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your 2008+ Mitsubishi Lancer Evolution X operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Fiber Cooling Plate for the 2008+ Mitsubishi Lancer Evolution X to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon versions.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Disclaimer: Tecnocraft Composites and Password:JDM's B Stock items are items that didn't quite pass our quality standards. The items on the B Stock page are fully functional and great products for someone who doesn't mind a small imperfection for a discounted price. Tecnocraft does not accept returns on B stock items. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM dry carbon fiber ECU over-cover for the 2012-2015 Honda Civic adheres to your stock ECU and will help clean up the look of your engine bay making your engine stand out, while adding a much-needed accent to the scene.

Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Note:The Password:JDM Dry Carbon Fiber ECU Over Cover fits over the factory part and is adhered with double side tape.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Our Fuse Box Cover is a simple but quite satisfying part that can be the start of you bedazzling your engine bay. If you're on the fence about it engine bay customization and want to start out we recommend 3 parts that look well together: our Fuse Box Over Cover, ECU Over Cover, and our Battery Cover. Please note that for the FK8 those parts are different you can find them here: FK8 ECU Cover & FK8 Battery Cover . These parts sit close together in your Civic's engine and when all paired and matched with Carbon Fiber, it'll be a neck breaker. With easy installation, this part will make you want to pop your engine bay whenever you park. 

Fitment: Fits all 2016-21 Honda Civic models INCLUDING Type R

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts finished in the natural dry carbon fiber, which does not include any UV-protectant clear-coat finish. Due to this being an exterior part we recommend to apply a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. You can also optionally have a body shop apply the UV resistant clear-coat finish for added protection.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Password:JDM's ECU Cover for your 2016-2021 Civic is a fast and easy addition to your engine bay. This item is a great entrance into engine bay decoration, especially when paired with our Battery Cover and Fuse Box Over Cover, please note the battery cover for the FK8 is different and can be found here: FK8 Battery Cover. All three parts sit next to each other on the right side of your engine bay. When you add a little Carbon Fiber or Kevlar to the mix it becomes LETHAL. Just kidding, but it is a definite head turner. 

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Disclaimer: Tecnocraft Composites and Password:JDM's B Stock items are items that didn't quite pass our quality standards. The items on the B Stock page are fully functional and great products for someone who doesn't mind a small imperfection for a discounted price. Tecnocraft does not accept returns on B stock items. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Designed specifically for the JDM 1994-2001 DC2 Integra front bumper, this Dry Carbon Fiber Intake Duct Type II will keep cool air flowing to your intake system. This Intake Duct is to be affixed to the lower right or left hand side of the bumper to direct the airflow towards the filter on most cold air intake systems on the market, or on both sides to route cool air to the brake system. Minor trimming required for fitment.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Carbon Fiber Airbag Trays have been described as a work of art! We showed this off and everyone only had nice things to say! But to us, it's just another product we should have made available long ago. Our Password:JDM Carbon Fiber Airbag Trays are a direct replacement! It's perfect for those who choose to have their airbag removed for safety reasons on road courses or when drag racing. 

Crafted from aerospace grade 2x2 twill Carbon Fiber and 100% high solid epoxy resin, our bags trays are designed to fit the USDM vehicles without any modification to your stock dash. This means that you can retain your factory airbag and reinstall it later if you need to. The Password:JDM Carbon Fiber Airbag Trays are truly plug & play! Installation takes less than 20 minutes, and requires only the basic tools that every car enthusiast should have! A quality fit and finish is guaranteed.

The Password:JDM Carbon Fiber Airbag Tray is a nice finishing touch to any vehicle that's show/race worthy. These are high quality pieces crafted here in the States. Like all of Password:JDM's products, these are produced one at a time. The exceptionally consistent quality you would expect from us is delivered each and every single time.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Modifying, disconnecting, or removing airbag systems, components and/or hardware should only be done on vehicles used purely for race/show purpose only. In some countries, it is illegal to tamper or modify any portion of the supplemental restraint system (SRS). Please check with your local, state and/or federal laws pertaining to automotive SRS systems. Password does not assume any liability for damages resulting from the use of our Airbag trays. End users assumes all liabilities when using this product. Our Airbag trays are intended strictly for off-road racing use only!!!

Mounting requires the use of some sort of bonding agent such as double sided tape along the edges or a silicon adhesive. Removal of the factory airbag (SRS) should be done by a trained and certified professional who knows how to disconnect the battery and SRS control unit prior to any airbag removal.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer:
All Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a finger print, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable. Such minor imperfections are race industry standard and considered acceptable. Therefore it is NOT considered to be defective.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Password:JDM has done it again! We have crafted this exotic, race-inspired, dry carbon spark plug cover to spice up the look of your engine bay! Like all of our Dry Carbon parts we manufacture, this plug cover has been precision crafted for a perfect fitment every time. We have used a fade-resistant resin during the manufacturing process to ensure this plug cover will always look & function as good as the day you bought it! Fits any B-Series VTEC equipped Honda vehicle.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be no returns on painted products. 

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your FA 2006-2011 Civic's Sedans operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Fiber Cooling Plate for the 06+ Honda Civic 4Dr Sedan to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon versions.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Engine Cover for the 2013-2020 Subaru BRZ / Scion FR-S will clean up the look of your engine bay! Like all of the Dry Carbon parts we manufacture, this engine cover has been precision-crafted for a perfect fitment every time. We have used a fade-resistant resin during the manufacturing process to ensure this plug cover will always look & function as good as the day you bought it!

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

The Password:JDM Dry Carbon Fiber Gurney Flap / Wickerbill is a short lip that protrudes upward from the upper trailing edge of the 06-11 Civic Si 4DR's factory wing. It’s used to enhance the wing’s down-force characteristics by separating the airflow on the back side of the wing, primarily that which comes over the top of the wing. The result creates a localized high-pressure zone on the top side of the wing generating down-force.

When used in conjunction with a functional front splitter and canards, you will be able to enhance the overall aerodynamic characteristics of your 06-11 Civic Si 4DR.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Make you and your ride more noticeable with this Password:JDM EF '88-'91 CRX SiR Carbon Fiber Front Lip! What sets Password:JDM apart is that our carbon fiber is very flexible (similar to flexible-FRP found on most JDM lip kits) and will not crack easily under normal daily driving. It's a great way to get the attention you deserve!

Password:JDM carbon fiber lips are made from the finest grade "A" carbon fiber available. Each lip is protected with a UV coating that will allow the lip to hold its high gloss finish. Password:JDM carbon fiber lips have a tight carbon weave. 

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Please note that this lip will fit both the JDM front end AND the 90-91 US CRX front end with minor trimming of the trim piece that curves into the fog light hole of the JDM EF8 bumper

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Designed to ram/force feed colder atmospheric air into your engine at all speeds, the Password:JDM Dry Carbon Fiber Ram Air Scoop will allow your intake system to work at full potential.

Each one of the PasswordJDM Dry Carbon Fiber Ram Air Scoops are individually hand crafted here in the states for quality. The Password:JDM Dry Carbon Ram Air Scoop is a simple bolt on installation that can be performed in minutes. Simply swap this carbon scoop in place of your factory headlight and you're done!

NOTE: For this item, the side you want the part to be on would be viewed from the USDM Driver Seat (Left Side Driver). If you have any questions, feel free to contact us to ensure you get the correct item.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your 2015-2021 Subaru WRX's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Fiber Cooling Plate for the 2015-2021 Subaru WRX's to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving. This will fit normal WRX and STi models.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, but you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon version.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Aftermarket Parts: Some aftermarket radiators are positioned differently than stock. It may need modifications to ensure a smooth fitting. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Password:JDM has done it again! We have crafted this exotic, race inspired, dry carbon coil pack cover for K-Series to spice up the look of your engine bay! Like all of our Dry Carbon parts we manufacture, this plug cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this plug cover will always look & function as good as the day you bought it! Fits any K-Series equipped Honda vehicle.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.