S2000

Add that last finishing touch to your engine bay with these all new Password:JDM fender washers! Offered in anodized black, blue, gold, purple, red, gunmetal, silver, green, pink and orange these fender washers feature the Password:JDM Kenji logo. All Password:JDM fender washers are constructed from aircraft grade aluminum and are matched up with long lasting stainless steel bolts.

The Password:JDM Fender Washer Kits include 6Mx20 stainless steel bolts. The fender washers will fit any 10mm bolt hole under the hood of your Honda. The 6Mx20 bolts is recommended for all parts under your hood such as fenders, headlights, bumpers, etc.

Please note that each pack comes with 5 washers and bolts

**Only Authorized Seller For Password:JDM**


Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Replacement Air Filter:

• PowerChamber Intake EK, DC, RSX, FG, 
• Height: 6"
• Flange I.D: 4.5" 
• Top Outside Dia: 5"

The Password:JDM Carbon Fiber Airbag Trays have been described as a work of art! We showed this off and everyone only had nice things to say! But to us, it's just another product that we should have made available a long time ago. Our Password:JDM Carbon Fiber Airbag Trays are a direct replacement! It's perfect for those who choose to have their airbag removed for safety reasons on road courses or when drag racing.

Crafted from aerospace grade 2x2 twill Carbon Fiber and 100% high solid epoxy resin, our bags trays are designed to fit the USDM vehicles without any modification to your stock dash. What this means is that you can retain your factory airbag and reinstall it later if you need to. The Password:JDM Carbon Fiber Airbag Trays are truly plug & play! Installation takes less than 20 minutes, and requires only the basic tools that every car enthusiast should have! A quality fit and finish is guaranteed.

The Password:JDM Carbon Fiber Airbag Tray is a nice finishing touch to any vehicle that's show/race worthy. These are high quality pieces crafted here in the States. Like all of Password:JDM's products, these are produced one at a time. The exceptionally consistent quality you would expect from us is delivered each and every single time.

Modifying, disconnecting, or removing airbag systems, components and/or hardware should only be done on vehicles used purely for race/show purpose only. In some countries, it is illegal to tamper or modify any portion of the supplemental restraint system (SRS). Please check with your local, state and/or federal laws pertaining to automotive SRS systems. Password does not assume any liability for damages resulting from the use of our Airbag trays. End users assumes all liabilities when using this product. Our Airbag trays are intended strictly for off-road racing use only!!!

Mounting requires the use of some sort of bonding agent such as double sided tape along the edges or a silicon adhesive. Removal of the factory airbag (SRS) should be done by a trained and certified professional who knows how to disconnect the battery and SRS control unit prior to any airbag removal.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Revitalize your PasswordJDM part with a fresh, new badge.

Password:JDM Dry Carbon Fiber Ram Air Induction Kit for the Honda S2000… Us fellas here at PasswordJDM rolled up our sleeves and went to work for days and months designing this thing, and now, its just about perfect. It’s everything you want for an intake system and all for under a grand! The entire system only weighs 1.8kgs/3.9lbs(stock air box weighs 4.4kg/9.7lbs) making this the lightest and strongest carbon fiber intake system on the market. Made entirely of Dry Carbon, the PWJDM intake system is a combination of individual components designed to work flawlessly with one another. Designed to ram/force feed colder atmospheric air into your engine at all speeds, the PWJDM S2K Dry Carbon PowerChamber/ColdAirChamber/RamAir Intake system has it all when it comes to what he/she wants from an intake system.

Each one of the PasswordJDM Dry Carbon Intake Systems are individually hand crafted here in the states for quality. With the PWJDM S2K Dry Carbon PowerChamber/ColdAirChamber/RamAir Intake System, you do not need to cut or trim the OEM hood or bumper for a proper fitment like other systems currently on the market. Install in less than an hour, the PWJDM Intake system was designed in-house using the same intake design theories used in F1 and ALMS. The ratio of the RamAir scoop’s size and inlet tube’s dimension was calculated to be optimal without having to cut up a stock OEM hood for clearance. We can go on for days(blah blah blah) about how we went back and redid this or that… we would rather not because the end result is what it is… the PWJDM intake system is the best Intake System there is on the market. The ColdAirChamber section of the system was designed to shield the intake air away from the exhaust heat and other heat sources underneath your hood. Heat soak is very bad for intakes, and we kept that in mind when we sat down and penciled this one out. The PowerChamber by design has the largest reservoir of air after the filter. This makes all the difference when it comes to making more or less horsepower. You won’t find a lighter and more impressive intake system on the market for any amount of money.

The PWJDM S2K Dry Carbon PowerChamber/ColdAirChamber/RamAir Intake system is it. Hands down, this is the intake system to get. Our head designer has about 20 years of experience engineering dry carbon intakes and aero components for various race teams in F1, ALMS, and a few other series. He knows what he’s doing… and it shows very well in the PWJDM product line. Dropping badass product at a neck breaking pace is what we like to do around here at PasswordJDM. Keep PWJDM in mind when you’re in the market for an intake or looking to upgrade the one you have already.

The complete induction kit includes the following:
- Cold Air Scoop & Snorkel
- Cold Air Box
- PowerChamber Tube

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

NOTE: This product is NOT legal for sale, installation, or use on a pollution controlled vehicle in the state of California. This product is NOT CARB legal. Legal only for racing vehicles in closed course competitions which will never be driven on a public right of way. California orders will be canceled and refunded.

The cooling system is a vital component of your S2000's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Dry Carbon S2000 Radiator Cooling Plate to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, but you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light (230 grams!), often more than twice as light as a clear-coated carbon version.

This version of the cooling plate is perfect for S2000s running the stock air box, turbo kit, or AEM/Injen style intake systems.

• Quick 10-minute install
• Super light dry carbon cover

Please note that we highly recommend you purchase this with our Passwordjdm Fender Washer Kit as we have found that the OEM hardware does not install very well with our cooling plate.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

A stock engine bay is lame. Your S2000 deserves better, and the best way to treat it right is to dress it up with this kick-ass radiator cover. Unlike the other covers out there, the Password:JDM Dry Carbon Fiber Cooling Plate for the AP Honda S2000 is super light, often more than twice as light as a clear-coated carbon cover.

• Quick 10-minute install
• Super light dry carbon cover

Please note that we highly recommend you purchase this with our Passwordjdm Fender Washer Kit as we have found that the OEM hardware does not install very well with our cooling plate.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Password:JDM offers a Dry Carbon OEM Airbox Cover designed for the 2000-2008 S2000, serving as a direct substitute for the original plastic airbox cover with an aftermarket intake snorkel installed.

Please note that trimming may be necessary when using the OEM plastic intake scoop.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Set at 22.5 degrees of rake, the Password:JDM Dry Carbon Street Canards will generate 43lbs of down-force per side in the frontal corners starting at 40mph. That is 86lbs of down-force up front without the use of any additional splitters... with the use of a functional front splitter, you can balance the amount of down-force required as per your setup and application per racetrack.

Note: This item will only fit the OEM AP2 Bumper for the 2004-2009 S2000.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Introducing the PWJDM Dry Carbon Center Console… The PWJDM Dry Carbon Center Console is the best there is! Engineered in house for a perfect fit and finish without the use of any hardware, the PWJDM Center Console does volumes for the look of your interior. This item is 100% hand crafted here in the USA. What differentiates the PWJDM Dry Carbon Center Console from just about anything else in the marketplace is that ours is made entire of Dry Carbon and wraps around behind the seat for that perfect look. It would have been impossible to make this out of cheaper wet carbon and still maintain this level of fit and finish… This is why PWJDM will only produce in dry carbon.

• 100% MADE IN THE USA in house by Tecnocraft Composites
• 100% Dry carbon vacuum formed using Aerospace grade Carbon material and Epoxy Resins
• UV resistant, Will not fade or crack during its lifetime or during installation unlike wet carbon pieces
• NO Hardware required, ultra-light weight, perfect fit and finish
• Installs in 2 hours or less depending on skill level
• Wraps around behind the seats

Attention AP1 S2000 Owners
If you own an AP1 S2000, the Password:JDM Dry Carbon Center Console will fit your vehicle, but you will need to purchase the AP2 S2000 center console cover to cover all trim lines.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. Instead, we recommend applying a spray-on wax or ceramic coat to prevent water spots / white marks from appearing after rain or car washing.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

You trying to rep our logo at your next meet? Make sure to grab one of our License Plate Frames! This frame has our name on it, so people know you got some Carbon Fiber goods under the hood when you pull up. Easy to install (we hope you can do this), and instant flex points. 

Care instructions: Wash your car so you don't get a brown font on the Frame, and you'll be good to go.

Disclaimer: Your hand will become tired from pointing to your license plate frame constantly whenever people ask "Yo, where did you get those Carbon Fiber parts?". Please ask a medical professional for a wrist brace or splint. 

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

A stock engine bay is lame. Your S2000 deserves better, and the best way to treat it right is to dress it up with this kick-ass radiator cover. Unlike the other covers out there, the Password:JDM Dry Carbon Fiber Cooling Plate for the AP Honda S2000 is super light, often more than twice as light as a clear-coated carbon cover.

• Quick 10-minute install
• Super light dry carbon cover

Please note that we highly recommend you purchase this with our Passwordjdm Fender Washer Kit as we have found that the OEM hardware does not install very well with our cooling plate.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

A stock engine bay is lame. Your S2000 deserves better, and the best way to treat it right is to dress it up with this kick-ass radiator cover. Unlike the other covers out there, the Password:JDM Dry Carbon Kevlar Cooling Plate for the Honda S2000 is super light, often more than twice as light as a clear-coated carbon cover.

• Quick 10-minute install
• Super light dry carbon/kevlar cover

Please note that we highly recommend you to purchase this with our Passwordjdm Fender Washer Kit as we have found that the OEM hardware does not install very well with our cooling plate.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

PasswordJDM Limited Re-Release License Plate Frame – Back by Popular Demand!
Missed out the first time? Now’s your chance! The PasswordJDM License Plate Frame is back for a limited re-release, giving die-hard JDM enthusiasts another shot at securing this iconic accessory. 

Introducing the PWJDM S2K Dry Carbon/Kevlar PowerChamber/ColdAirChamber/RamAir Intake system… Us fellas here at PasswordJDM rolled up our sleeves and went to work for days and months designing this thing, and now, its just about perfect. It’s everything you want for an intake system! The entire system only weighs 1.8kgs/3.9lbs(stock air box weighs 4.4kg/9.7lbs) making this the lightest and strongest carbon / kevlar intake system on the market. Made entirely of Dry Carbon/Kevlar, the PWJDM intake system is a combination of individual components designed to work flawlessly with one another. Designed to ram/force feed colder atmospheric air into your engine at all speeds, the PWJDM S2K Dry Carbon/Kevlar PowerChamber/ColdAirChamber/RamAir Intake system has it all when it comes to what he/she wants from an intake system.

Each one of the PasswordJDM Dry Carbon/Kevlar Intake Systems are individually hand crafted here in the states for quality. With the PWJDM S2K Dry Carbon/Kevlar PowerChamber/ColdAirChamber/RamAir Intake System, you do not need to cut or trim the OEM hood or bumper for a proper fitment like other systems currently on the market. Install in less than an hour, the PWJDM Intake system was designed in-house using the same intake design theories used in F1 and ALMS. The ratio of the RamAir scoop’s size and inlet tube’s dimension was calculated to be optimal without having to cut up a stock OEM hood for clearance. We can go on for days(blah blah blah) about how we went back and redid this or that… we would rather not because the end result is what it is… the PWJDM intake system is the best Intake System there is on the market. The ColdAirChamber section of the system was designed to shield the intake air away from the exhaust heat and other heat sources underneath your hood. Heat soak is very bad for intakes, and we kept that in mind when we sat down and penciled this one out. The PowerChamber by design has the largest reservoir of air after the filter. This makes all the difference when it comes to making more or less horsepower. You won’t find a lighter and more impressive intake system on the market for any amount of money.

The PWJDM S2K Dry Carbon/Kevlar PowerChamber/ColdAirChamber/RamAir Intake system is it. Hands down, this is the intake system to get. Our head designer has about 20 years of experience engineering dry carbon/kevlar intakes and aero components for various race teams in F1, ALMS, and a few other series. He knows what he’s doing… and it shows very well in the PWJDM product line. Dropping badass product at a neck breaking pace is what we like to do around here at PasswordJDM. Keep PWJDM in mind when you’re in the market for an intake or looking to upgrade the one you have already.

The complete induction kit includes the following:
- Cold Air Scoop & Snorkel
- Cold Air Box
- PowerChamber Tube

Installation Guide:
- 2000/2005 Honda S2000 - Adobe Acrobat .PDF format (4.87 MB)
- 2006/2008 Honda S2000 - Adobe Acrobat .PDF format (2.66 MB)

Note: Dry Carbon Fiber Cooling Plate is sold separately!

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

NOTE: This product is NOT legal for sale, installation, or use on a pollution-controlled vehicle in the state of California. This product is NOT CARB legal. Legal only for racing vehicles in closed course competitions which will never be driven on a public right of way. California orders will be canceled and refunded.

PasswordJDM Carbon Fiber Headlight Blockoff – Honda S2000

Looking to give your Honda S2000 a race-ready look while reducing unnecessary weight? The PasswordJDM Carbon Fiber Headlight Blockoff is the perfect solution for track enthusiasts and serious performance builds. Designed to replace the factory headlights, these blockoff plates are crafted from high-quality dry carbon fiber, offering both a sleek aesthetic and functional aerodynamic benefits.

Whether you're running a dedicated track car, a drag build, or simply prefer a more aggressive front-end style, these blockoff plates help eliminate unnecessary components while maintaining a factory-like fit. PasswordJDM’s signature dry carbon construction ensures lightweight durability, making it a must-have upgrade for those who demand performance and style.

 

The Password:JDM Dry Carbon Fiber Fuse Box over-cover for the 2000-2009 Honda S2000 adheres to your stock fuse box cover, making it a fast and easy installation. Within minutes add some pizzazz to the factory’s rats' nest of an engine bay. The Carbon Fiber will help add some much-needed accents and stand out amongst the crowd. Go ahead and pop your hood so you can see the nod of approval from the crowd, you know, it’s the one that says: “this person knows what they’re doing”. 

Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Note: The Password:JDM Dry Carbon Fiber Fuse Box Over Cover fits over the factory part and is adhered with double side tape.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Looking to add some Carbon Fiber to your engine bay? The Password:JDM Dry Carbon Fiber Coil Pack sits right on top of your engine and is an easily installed part. If you pop the hood of your car often and have other carbon fiber goods on your build this part will continue to add style points. It sits flush on top and covers your spark plugs with a sleek Carbon Fiber look. Just remember if you win any trophies, you can thank us via email.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in the weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand-crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standards and considered acceptable.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

“Shit! it’s hotter than your friend’s sister up in here” Well, that’s what the ghosts in the machine are saying as you redline your S2000 like you just stole it. Well, if you need to cool things down you need this fly dry carbon engine heatshield, especially if you’re rockin an aftermarket intake system.

• 15-minute install
• Super light dry carbon plate blocks heat from front of engine bay
• Hardware included:  (3) PasswordJDM Fender Washer M6x14 and (2) M6x16 Flange Hex Bolt

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Tecnocraft Dry Carbon Fiber Universal Hood Vents, serve several, purpose like improved cooling by allowing hot air to exit the engine bay more efficiently.  Aerodynamics by reduced air pressure buildup in the engine compartment.

Dimensions: 

• Overall Length: (17.25in)
• Overall Width:(4.75in)
• Approximate Height: (2in)

NOTE: These vents do not include hardware and are not pre-drilled. These vents are sold as a pair.

The cooling system is a vital component of your S2000's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Kevlar Cooling Plate for the Honda S2000 to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, but you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light (230 grams!), often more than twice as light as a clear-coated carbon version.

This version of the cooling plate is perfect for S2000's running the stock airbox, turbo kit, or AEM/Injen style intake systems.

• Quick 10-minute install
• Super light dry carbon cover

Please note that we highly recommend you to purchase this with our Passwordjdm Fender Washer Kit as we have found that the OEM hardware does not install very well with our cooling plate.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Password:JDM Dry Carbon Fiber Header Heatshield (AP S2000)

Keep heat where it belongs and give your S2000 engine bay the high-end look it deserves with the Password:JDM Dry Carbon Fiber Header Heatshield. Crafted from aerospace-grade dry carbon fiber, this heatshield provides exceptional thermal protection while maintaining an ultra-lightweight construction.

Designed specifically for the Honda S2000 (AP1/AP2), this piece effectively deflects radiant heat from the headers, helping reduce under-hood temperatures and protecting surrounding components. The precision-molded fit ensures clean installation with factory mounting points — no modifications required.

Features:

• Genuine dry carbon fiber construction – lightweight and ultra-rigid
• Reduces under-hood heat and protects wiring, hoses, and components
• Direct bolt-on fitment for AP1/AP2 S2000

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

“Shit! it’s hotter than your friend’s sister up in here” Well, that’s what the ghosts in the machine are saying as you redline your S2000 like you just stole it. Well, if you need to cool things down you need this fly dry carbon fiber header heat shield, especially if you’re rockin an aftermarket intake system. This part is a perfect complement to our engine heat shield and Ram Air intake system!

• 15-minute install
• Super light dry Carbon Kevlar fiber plate blocks heat from front of engine bay

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Some say power corrupts. Well that may be true in governments, but it’s all pleasure when it comes to your baby. Your stock S2000’s intake is $h!t, just look at it. Now look at this dry carbon beauty. It scoops in cold air from in front of the radiator, ahhhhh, coolness. Your engine will be happier breathing this cool air, and when your engine is happy; it gives you more power. So be a good owner and treat your baby right.

• Scoops cold air into airbox
• Super light dry carbon
• All hardware included

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM dry Carbon Kevlar fuse box over-cover for the 2000-2009 Honda S2000 adheres to your stock fuse box cover and will help clean up the look of your engine bay making your engine stand out, while adding a much-needed accent to the scene.

Like all of our dry carbon kevlar parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it.

Note: The Password:JDM Dry Carbon Kevlar Fuse Box Over Cover fits over the factory Fuse Box and is adhered with double side tape.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Upgrade Your Honda S2000 with Password Carbon Fiber Fuel Pump Covers!

Give your Honda S2000 a stylish boost with the Password Carbon Fiber Fuel Pump Covers. These covers are a direct replacement for the stock ones and are perfect for adding a sleek touch to the interior, replacing that plain, exposed look around the fuel pump.

Made from top-quality carbon fiber, these covers not only look great but are also built to last. They feature a UV coating to keep that glossy finish shining bright. Password is known for its precision craftsmanship, with a tight carbon weave that delivers a durable and polished appearance.  Stand out with these unique fuel pump covers, made just for your Honda S2000—only from Password

This application will fit all:
2000-2003 Honda S2000 AP1

2004-2009 Honda S2000 AP2

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Care instructions: Please note that these parts are finished in natural dry carbon fiber. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your S2000's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Dry Carbon S2000 Radiator Cooling Plate to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

This version of the cooling plate is perfect for S2000s running the stock air box, turbo kit, or AEM/Injen style intake systems.

• Quick 10-minute install
• Super light dry carbon cover

Please note that we highly recommend you to purchase this with our Passwordjdm Fender Washer Kit as we have found that the OEM hardware does not install very well with our cooling plate.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Disclaimer: Tecnocraft Composites and Password:JDM's B Stock items are items that didn't quite pass our quality standards. The items on the B Stock page are fully functional and great products for someone who doesn't mind a small imperfection for a discounted price. Tecnocraft does not accept returns on B stock items. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

“Shit! it’s hotter than your friend’s sister up in here” Well, that’s what the ghosts in the machine are saying as you redline your S2000 like you just stole it. Well if you need to cool things down you need this fly dry carbon/Kevlar engine heatshield, especially if you’re rockin an aftermarket intake system.

• 15 minute install
• Super light dry carbon/Kevlar plate blocks heat from front of engine bay
• Hardware included:  (3) PasswordJDM Fender Washer M6x14, (2) M6x16 Flange Hex Bolt

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Carbon Kevlar Airbag Trays have been described as a work of art! We showed this off and everyone only had nice things to say! But to us, it's just another product that we should have made available a long time ago. Our Password:JDM Carbon Fiber Airbag Trays are a direct replacement! It's perfect for those who choose to have their airbag removed for safety reasons on road courses or when drag racing.

Crafted from aerospace grade Carbon Kevlar and 100% high solid epoxy resin, our air bag trays are designed to fit the USDM vehicles without any modification to your stock dash. What this means is that you can retain your factory airbag and reinstall it later if you need to. The Password:JDM Carbon Fiber Airbag Trays are truly plug & play! Installation takes less than 20 minutes and requires only the basic tools that every car enthusiast should have! A quality fit and finish are guaranteed.

The Password:JDM Carbon Fiber Airbag Tray is a nice finishing touch to any vehicle that's show/race worthy. These are high quality pieces crafted here in the States. Like all of Password:JDM's products, these are produced one at a time. The exceptionally consistent quality you would expect from us is delivered each and every single time.

Modifying, disconnecting, or removing airbag systems, components and/or hardware should only be done on vehicles used purely for race/show purpose only. In some countries, it is illegal to tamper or modify any portion of the supplemental restraint system (SRS). Please check with your local, state and/or federal laws pertaining to automotive SRS systems. Password does not assume any liability for damages resulting from the use of our Airbag trays. End users assumes all liabilities when using this product. Our Airbag trays are intended strictly for off-road racing use only!!!

Mounting requires the use of some sort of bonding agent such as double-sided tape along the edges or a silicon adhesive. Removal of the factory airbag (SRS) should be done by a trained and certified professional who knows how to disconnect the battery and SRS control unit prior to any airbag removal.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

PasswordJDM Carbon Fiber Center Console for Honda S2000

Give your fully gutted Honda S2000 race car a refined finishing touch with the PasswordJDM Carbon Fiber Center Console. Designed specifically for enthusiasts who prioritize performance while maintaining a clean interior look, this "Race" version console elegantly covers the center pocket area, enhancing both aesthetics and comfort.

Crafted from premium carbon fiber, this center console is lightweight yet durable, offering a race-ready appearance that complements the stripped-down interior of your S2000. By covering the exposed pocket, the console provides a smoother and more comfortable shifting experience, perfect for intense track days or spirited drives.

Features:

• Premium Carbon Fiber Construction: Lightweight, durable, and visually striking.
• Race-Ready Design: Tailored for gutted interiors to provide a sleek and functional finish.
• Enhanced Comfort: Covers the center pocket for smoother, more comfortable shifting.
• Universal Fit for All Years: Compatible with all Honda S2000 model years.
• Customizable Installation: Some modification may be required for the perfect fit.

Upgrade your Honda S2000’s race car interior with the PasswordJDM Carbon Fiber Center Console—the ultimate combination of performance, style, and functionality.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be no returns on painted products

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. Instead, we recommend applying a spray-on wax or ceramic coat to prevent water spots / white marks from appearing after rain or car washing.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Upgrade Your Honda S2000 with Password Carbon Kevlar Fuel Pump Covers!

Give your Honda S2000 a stylish boost with the Password Carbon Kevlar Fuel Pump Covers. These covers are a direct replacement for the stock ones and are perfect for adding a sleek touch to the interior, replacing that plain, exposed look around the fuel pump.

Made from top-quality carbon fiber, these covers not only look great but are also built to last. They feature a UV coating to keep that glossy finish shining bright. Password is known for its precision craftsmanship, with a tight carbon weave that delivers a durable and polished appearance.  Stand out with these unique fuel pump covers, made just for your Honda S2000—only from Password

This application will fit all:
2000-2003 Honda S2000 AP1

2004-2009 Honda S2000 AP2

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Care instructions: Please note that these parts are finished in natural dry carbon fiber. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Password:JDM has done it again! We have crafted these exotic, race inspired, dry carbon kevlar spark plug covers to spice up the look of your engine bay! Like all of our Dry Carbon kevlar parts we manufacture, this plug cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this plug cover will always look & function as good as the day you bought it! Fits any Honda S2000.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Suspension Caps for the AP1 S2000 will clean up the look of your engine bay! Like all of our Dry Carbon parts we manufacture, this frame shield has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this engine cover will always look & function as good as the day you bought it! 

Note: Sold as a pair. This part will not allow you to use any strut bar if you have one. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Set at 22.5 degrees of rake, the Password:JDM Dry Carbon Kevlar Street Canards will generate 43lbs of down-force per side in the frontal corners starting at 40mph. That is 86lbs of down-force up front without the use of any additional splitters... with the use of a functional front splitter, you can balance the amount of down-force required as per your setup and application per racetrack.

Note: This item will only fit the OEM AP2 Bumper for the 2004-2009 S2000.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Introducing the PWJDM Dry Carbon Kevlar Center Console… The PWJDM Dry Carbon Kevlar Center Console is the best there is! Engineered in house for a perfect fit and finish without the use of any hardware, the PWJDM Center Console does volumes for the look of your interior. This item is 100% hand crafted here in the USA. What differentiates the PWJDM Dry Carbon Center Console from just about anything else in the marketplace is that ours is made entire of Dry Carbon Kevlar and wraps around behind the seat for that perfect look. It would have been impossible to make this out of cheaper wet carbon and still maintain this level of fit and finish… This is why PWJDM will only produce in dry carbon Kevlar.

• 100% MADE IN THE USA in house by PASSWORDCOMPOSITES
• 100% Dry carbon Kevlar vacuum formed using Aerospace grade Carbon material and Epoxy Resins
• UV resistant, Will not fade or crack during its lifetime or during installation unlike wet carbon pieces
• NO Hardware required, ultra-light weight, perfect fit and finish
• Installs in 2 hours or less depending on skill level
• Wraps around behind the seats

Attention AP1 S2000 Owners
If you own an AP1 S2000, the Password:JDM Dry Carbon Center Console will fit your vehicle, but you will need to purchase the AP2 S2000 center console cover to cover all trim lines. This may be purchased through your local Honda dealer.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Upgrade your Honda S2000's engine bay aesthetics with the Password:JDM Carbon Fiber Hood Notch Top Cover. Crafted from premium dry carbon fiber, this lightweight accessory is designed to seamlessly conceal the hood modifications required for enhanced intake clearance, delivering a clean, professional finish without compromising performance.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer:
All Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a finger print, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable. Such minor imperfections are race industry standard and considered acceptable. Therefore it is NOT considered to be defective.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item is a special order and will ship out 2-3 weeks from the original purchase.

Password:JDM Dry Carbon Fiber Header Heatshield (AP S2000)

Keep heat where it belongs and give your S2000 engine bay the high-end look it deserves with the Password:JDM Dry Carbon Fiber Header Heatshield. Crafted from aerospace-grade dry carbon fiber, this heatshield provides exceptional thermal protection while maintaining an ultra-lightweight construction.

Designed specifically for the Honda S2000 (AP1/AP2), this piece effectively deflects radiant heat from the headers, helping reduce under-hood temperatures and protecting surrounding components. The precision-molded fit ensures clean installation with factory mounting points — no modifications required.

Features:

• Genuine dry carbon fiber construction – lightweight and ultra-rigid
• Reduces under-hood heat and protects wiring, hoses, and components
• Direct bolt-on fitment for AP1/AP2 S2000

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.