Honda

The Password:JDM Carbon Fiber Airbag Trays have been described as a work of art! We showed this off and everyone only had nice things to say! But to us, it's just another product that we should have made available a long time ago. Our Password:JDM Carbon Fiber Airbag Trays are a direct replacement! It's perfect for those who choose to have their airbag removed for safety reasons on road courses or when drag racing.

Note: Right Hand Drive (RHD) vehicles only.

Crafted from aerospace grade 2x2 twill Carbon Fiber and 100% high solid epoxy resin, our bags trays are designed to fit the USDM vehicles without any modification to your stock dash. What this means is that you can retain your factory airbag and reinstall it later if you need to. The Password:JDM Carbon Fiber Airbag Trays are truly plug & play! Installation takes less than 20 minutes, and requires only the basic tools that every car enthusiast should have! A quality fit and finish is guaranteed.

The Password:JDM Carbon Fiber Airbag Tray is a nice finishing touch to any vehicle that's show/race worthy. These are high quality pieces crafted here in the States. Like all of Password:JDM's products, these are produced one at a time. The exceptionally consistent quality you would expect from us is delivered each and every single time.

Available fitments:

EG '92-'95 Civic
EK '96-'00 Civic
DC '94-'01 Integra

Modifying, disconnecting, or removing airbag systems, components and/or hardware should only be done on vehicles used purely for race/show purpose only. In some countries, it is illegal to tamper or modify any portion of the supplemental restraint system (SRS). Please check with your local, state and/or federal laws pertaining to automotive SRS systems. Password does not assume any liability for damages resulting from the use of our Airbag trays. End users assumes all liabilities when using this product. Our Airbag trays are intended strictly for off-road racing use only!!!

Mounting requires the use of some sort of bonding agent such as double sided tape along the edges or a silicon adhesive. Removal of the factory airbag (SRS) should be done by a trained and certified professional who knows how to disconnect the battery and SRS control unit prior to any airbag removal.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Gurney Flap / Wickerbill is a short lip that protrudes upward from the upper trailing edge of the FK8 Civic Type-R factory wing. It’s used to enhance the wing’s down-force characteristics by separating the airflow on the back side of the wing, primarily that which comes over the top of the wing. The result creates a localized high-pressure zone on the top side of the wing generating down-force.

When used in conjunction with a functional front splitter and canards, you will be able to enhance the overall aerodynamic characteristics of your FK8 Type-R.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Presenting yet another Password:JDM exclusive! Here are our new Password:JDM Carbon Kevlar Fuel Pump Covers! You will NOT find these anywhere else! These Carbon Kevlar fuel pump covers are a direct replacement. For those of you who have taken out your rear seats, these will definitely add some style to that dull "gutted out" look. All Password:JDM Carbon Kevlar products are made from the finest grade "A" Carbon Kevlar available. Each fuel pump cover is protected with a UV coating that will allow the piece to hold its high gloss finish. Password:JDM Carbon Kevlar products have a tight weave.

This application will fit all:
2002+ DC5 Integra/RSX
2002+ EP3 Civic Hatchback

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

“Shit! it’s hotter than your friend’s sister up in here” Well, that’s what the ghosts in the machine are saying as you redline your S2000 like you just stole it. Well if you need to cool things down you need this fly dry carbon/Kevlar engine heatshield, especially if you’re rockin an aftermarket intake system.

• 15 minute install
• Super light dry carbon/Kevlar plate blocks heat from front of engine bay
• Hardware included:  (3) PasswordJDM Fender Washer M6x14, (2) M6x16 Flange Hex Bolt

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Password:JDM has done it again! We have crafted these exotic, race inspired, dry carbon engine covers to spice up the look of your 2016-21 Honda Civic engine bay! Like all of our Dry Carbon parts we manufacture, this plug cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this plug cover will always look & function as good as the day you bought it!

Fitment: All 2016-2021 Honda Civic (1.5L Turbo Only)

Disclaimer:
All Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a finger print, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable. Such minor imperfections are race industry standard and considered acceptable. Therefore it is NOT considered to be defective.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Bumper Ducts for the 2012-2013 Honda Civic 2dr coupe are designed to serve multiple purposes based on your vehicle's needs. First, the bumper ducts can be used to route cool air to your braking system to keep your brakes from overheating in a race environment. Second, you can use the ducts to route cool air to your air intake system. Whatever purpose you use our ducts for, your vehicles our ducts will add an aggressive and unique look to the front end of our Civic product car!

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good, and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood. The Password:JDM dry carbon fiber engine frame shields for the 2008-2012 Honda Accord uses the factory mounting hardware from the fenders to cover up the open gaps in your engine bay and will help clean up the look of your engine bay, while adding a much needed accent to the scene. Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it. Includes right and left side pieces. Note: This fits only 2008-2012 Accord sedan, also including V6

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood. The Password:JDM dry Carbon Kevlar battery cover for the 2012-2015 Honda Civic uses the factory mounting hardware to cover your battery and will help clean up the look of your engine bay making your engine stand out, while adding a much-needed accent to the scene. Like all of our dry Carbon Kevlar parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it.

Warning: When installing battery covers please ensure your battery has a terminal cover, Carbon Fiber is a conductive material. If the terminal post is not covered the battery cover could melt causing damage to the product and/or your vehicle. Tecnocraft Composites does not cover damaged items due to customer negligence.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your 2008-2012 Accord's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Fiber Cooling Plate for the 08-12 Honda Accord to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon versions.

Note: This fits only 2008-2012 Accord sedan including V6

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your DC2 Integra's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Fiber Cooling Plate for the 94-01 Honda Integra with USDM Front Ends to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, but you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon version.

NOTE: Some trimming may be required around the filler neck with aftermarket radiators.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM dry carbon fiber engine frame shields for the 2016-2021 Honda Civic uses the factory mounting hardware from the fenders to cover up the open gaps in your engine bay and will help clean up the look of your engine bay, while adding a much-needed accent to the scene. It is also a functional part as we created a curve at the ends of each side to allow hot air to escape thru to the fenders and out the side vents.

Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it. Includes right and left side pieces.

Fitment: Fits all 2016-21 Honda Civic including Type R

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

PasswordJDM Carbon Fiber Coolant Reservoir for 2022 Honda Civic Si

Enhance your engine bay with the PasswordJDM Carbon Fiber Coolant Reservoir, specifically designed for the new 2022 Honda Civic Si. This premium coolant reservoir not only improves the look under the hood but also adds a touch of high-end style and sophistication.

Key Features:

• Premium Carbon Fiber Construction: Crafted from high-quality carbon fiber, this coolant reservoir is lightweight yet exceptionally strong. 
• Sleek and Stylish Design: The glossy carbon fiber finish adds a sleek, race-inspired look to your engine bay, making your Civic Si stand out at car meets and shows.
• Easy Installation: Designed for straightforward, hassle-free installation, this reservoir can be fitted with basic tools, making it an ideal upgrade for both novice and experienced car enthusiasts.

Why Choose PasswordJDM?

PasswordJDM is a trusted name in the automotive aftermarket industry, known for its commitment to quality and innovation. Our carbon fiber products are meticulously crafted to meet the highest standards, ensuring you get the best in terms of both form and function.

Compatibility:

• Fits the 2022 Honda Civic Si.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Password:JDM has done it again! We have crafted this exotic, race inspired, dry Carbon Kevlar spark plug covers to spice up the look of your engine bay! Like all of our Dry Carbon Kevlar parts we manufacture, this plug cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this plug cover will always look & function as good as the day you bought it! Fits any B-Series VTEC equipped Honda vehicle.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Password:JDM has done it again! We have crafted these exotic, race inspired, dry carbon intake manifold covers to spice up the look of your engine bay! Like all of our Dry Carbon parts we manufacture, this intake manifold cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this plug cover will always look & function as good as the day you bought it! Fit for all 2002-2007 DC5 RSX (except base model) and 2002-2005 EP3 Civic Si Models. This will fit the stock intake manifold, and also the Type-R intake manifold. This cover WILL NOT fit the RBC manifold.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Designed to ram/force feed colder atmospheric air into your engine at all speeds, the Password:JDM Dry Carbon Ram Air Scoop for the 1997-2001 Honda Prelude will allow your intake system to work at full potential.

Each one of the PasswordJDM Dry Carbon Ram Air Scoops are individually hand crafted here in the states for quality. The Password:JDM Dry Carbon Ram Air Scoop is a simple bolt on installation that can be performed in minutes. Simply swap this carbon scoop in place of your factory headlight and you're done!

NOTE: This item would replace the passenger side headlight unit.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Make you and your ride more noticeable with this J's style EK '99-'00 Civic Carbon Fiber Front Lip! What sets Password:JDM apart is that our carbon fiber is very flexible (similar to flexible-FRP found on most JDM lip kits) and will not crack easily under normal daily driving. It's a great way to get the attention you deserve!

Password:JDM carbon fiber lips are made from the finest grade "A" carbon fiber available. Each lip is protected with a UV coating that will allow the lip to hold its high gloss finish. Password:JDM carbon fiber lips have a tight carbon weave.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Made of aerospace-quality Carbon Fiber, the Password:JDM Carbon Fiber Power Chamber Intake with Velocity Stack surpasses any other intake on the market in quality, and in performance. Our intake is dyno-proven to make 6.5 WHP and 7.4 FTQ on a nearly stock B16A engine! Manufactured here in the USA, the Power Chamber is constructed of the finest carbon fiber, and filter elements currently available on the market. The Power Chamber Intake comes complete with all mounting hardware required to install on the 1992-2000 Civic with the factory intake manifold.

Using a unique flared intake tube design, the Power Chamber is able to deliver noticeable gains across the entire powerband. This intake gives you the best of both worlds. The security of knowing you are at no risk of hydro-lock, the power delivery that most cold air intake systems can only dream of, and the unmatched style of a genuinely unique intake system.

Through the integration of form and function, the Power Chamber will make a bold statement about you and your vehicle. Spectators all around will notice your fine taste in performance products and will envy your engine bay's unique styling!

Note: The normal PowerChamber air filter will be substituted for a larger air filter designed specifically for the velocity stack, and the long silver bracket shown in photo is no longer included with the intake. The PowerChamber should be able to mount without issue, even without the bracket.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

NOTE: This product is NOT legal for sale, installation, or use on a pollution-controlled vehicle in the state of California. This product is NOT CARB legal. Legal only for racing vehicles in closed course competitions which will never be driven on a public right of way. California orders will be canceled and refunded.

The Password:JDM Carbon Fiber CTR Base (EK 96-00 Civic Hatchback) is a subtle flex to add on to your hatch. This will replace the OEM CTR Base and is made out of dry carbon, cutting the weight of the OEM base by almost half. 

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Disclaimer: Tecnocraft Composites and Password:JDM's B Stock items are items that didn't quite pass our quality standards. The items on the B Stock page are fully functional and great products for someone who doesn't mind a small imperfection for a discounted price. Tecnocraft does not accept returns on B stock items. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. 

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your 2017-2021 Honda Civic Type R operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Fiber Cooling Plate for the 2017-21 Honda Civic Type R to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving. We also designed and incorporated "pockets" on the cooling plate which will increase airflow directly to the turbo and intake areas to help with cooling. Our cooling plate will bolt on directly and also allow you to bolt back on the factory rubber seal for the OEM snorkel of the intake box.

Not only will you gain cooling deficiency with the PWJDM radiator cooling plate, you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon versions.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Disclaimer: Tecnocraft Composites and Password:JDM's B Stock items are items that didn't quite pass our quality standards. The items on the B Stock page are fully functional and great products for someone who doesn't mind a small imperfection for a discounted price. Tecnocraft does not accept returns on B stock items. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. 

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your FG 2006-2011 Civic's Coupes operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Fiber Cooling Plate for the 06+ Honda Civic 2Dr Coupe to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon version

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Disclaimer: Tecnocraft Composites and Password:JDM's B Stock items are items that didn't quite pass our quality standards. The items on the B Stock page are fully functional and great products for someone who doesn't mind a small imperfection for a discounted price. Tecnocraft does not accept returns on B stock items. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. 

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

JDM cars can now one up another by rocking our Password:JDM Dry Carbon Fog lamps covers. When you go to meets and stuff, look at the cars, they all pretty much look the same. Made of Dry Carbon, these PasswordJDM fog lamp covers will set your ride apart from everyone else. Password:JDM understands this, and that’s why we came up with these. Not for everybody, only a chosen few…. Rock these covers only if you know what’s up with Dry Carbon.

These Dry Carbon Fog Lamp Covers will add the subtle difference to your ride. Looks cool and does a lot for your image. Like we’ve said time and time again, grab them today, rock them tomorrow, and be forever hated from there on after. Password has got you covered.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Disclaimer: Tecnocraft Composites and Password:JDM's B Stock items are items that didn't quite pass our quality standards. The items on the B Stock page are fully functional and great products for someone who doesn't mind a small imperfection for a discounted price. Tecnocraft does not accept returns on B stock items. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM dry Carbon Kevlar fuse box over-cover for the 2012-2015 Honda Civic adheres to your stock fuse box cover and will help clean up the look of your engine bay making your engine stand out, while adding a much-needed accent to the scene.

Like all of our dry Carbon Kevlar parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood. The Password:JDM dry Carbon Kevlar ECU over-cover for the 2012-2015 Honda Civic adheres to your stock ECU and will help clean up the look of your engine bay making your engine stand out, while adding a much-needed accent to the scene. Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it.

Note: The Password:JDM Dry Carbon Fiber ECU Over Cover fits over the factory part and is adhered with double side tape.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your 2012+ Honda Civic Si Coupe's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Kevlar Cooling Plate for the 2012+ Honda Civic Si Coupe to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, but you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon version.

Please note that this fits any 2012 and 2013 Honda Civic 2dr Coupe and only the 2012 Honda Civic 4dr Sedan.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM dry Carbon Kevlar Distributor Cover for Honda H-Series Engines will help clean up the look of your engine bay making your engine bay stand out, adding a race inspired look to your engine.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Bumper Ducts are designed to serve multiple purposes based on your vehicles needs. First, the bumper ducts can be used to route cool air to your braking system to keep your brakes from overheating in a race environment. Second, you can use the ducts to route cool air to your air intake system. Whatever purpose you use our ducts for, your vehicles our ducts will add an aggressive and unique look to the front end of our Civic product car!

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Password:JDM has done it again! We have crafted these exotic, race inspired, dry carbon intake manifold covers to spice up the look of your engine bay! Like all of our Dry Carbon parts we manufacture, this intake manifold cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this plug cover will always look & function as good as the day you bought it! Fit for all 2002-2007 DC5 RSX (except base model) and 2002-2005 EP3 Civic Si Models. This will fit the stock intake manifold, and also the Type-R intake manifold. This cover WILL NOT fit the RBC manifold.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM dry Kevlar fuse box over-cover for the 2002-2005 Honda Civic Si / 2002-2006 Acura RSX adheres to your stock fuse box cover and will help clean up the look of your engine bay making your engine stand out, while adding a much-needed accent to the scene.

Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it.

Note: The Password:JDM Dry Carbon Fiber Fuse Box Over Cover fits over the factory fuse box and is adhered with double side tape.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Carbon Kevlar Airbag Trays have been described as a work of art! We showed this off and everyone only had nice things to say! But to us, it's just another product that we should have made available a long time ago. Our Password:JDM Carbon Fiber Airbag Trays are a direct replacement! It's perfect for those who choose to have their airbag removed for safety reasons on road courses or when drag racing.

Crafted from aerospace grade Carbon Kevlar and 100% high solid epoxy resin, our air bag trays are designed to fit the USDM vehicles without any modification to your stock dash. What this means is that you can retain your factory airbag and reinstall it later if you need to. The Password:JDM Carbon Fiber Airbag Trays are truly plug & play! Installation takes less than 20 minutes and requires only the basic tools that every car enthusiast should have! A quality fit and finish are guaranteed.

The Password:JDM Carbon Fiber Airbag Tray is a nice finishing touch to any vehicle that's show/race worthy. These are high quality pieces crafted here in the States. Like all of Password:JDM's products, these are produced one at a time. The exceptionally consistent quality you would expect from us is delivered each and every single time.

Modifying, disconnecting, or removing airbag systems, components and/or hardware should only be done on vehicles used purely for race/show purpose only. In some countries, it is illegal to tamper or modify any portion of the supplemental restraint system (SRS). Please check with your local, state and/or federal laws pertaining to automotive SRS systems. Password does not assume any liability for damages resulting from the use of our Airbag trays. End users assumes all liabilities when using this product. Our Airbag trays are intended strictly for off-road racing use only!!!

Mounting requires the use of some sort of bonding agent such as double-sided tape along the edges or a silicon adhesive. Removal of the factory airbag (SRS) should be done by a trained and certified professional who knows how to disconnect the battery and SRS control unit prior to any airbag removal.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Love your Civic but wish Honda would have given it the more aggressive look it deserves? Password JDM has a solution to your problems! The Password:JDM Dry Carbon Fiber / Kevlar Trunk Finisher for the 2012-2015 Honda Civic 4dr Sedan!

The Trunk Finisher attaches to the outer edge on the Civic rear trunk, extending it while giving it an upward curve. We also designed it so that it will clear the factory Civic Si Spoiler as well! This part will fit both Si and non-Si trunk.

Using dry carbon construction we are able to make it lighter and stronger than that “wet-lay” carbon you see out there.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Lighter, stronger, and makes more power than most other intakes on the market today…

Introducing the all-new Password:JDM Dry Carbon Fiber PowerChamber Intake for the 06-15 Honda Civic with the R18 Engine. Just like the original PowerChamber from PWJDM, these makes all around usable power and has the killer looks to back it up. Dyno Proven +10 WHP gains over base line with no other modifications made to the car. (Dyno tested @ Erick’s Racing by Erick Aguilar); this intake went toe to toe with a leading Cold Air System and spanked it silly. Made 100% of Dry Carbon Fiber or Carbon Kevlar, the choice is yours. This PowerChamber intake weighs ounces, it’s so light… we were about to call it the anti-gravity intake.

The Password:JDM PowerChamber design makes more useable horsepower for normal and performance driving conditions. The problem with most CAI, is that they all look the same. It’s pretty much a filter on a stick if you think about it. It’s like trying to suck air or fluid through a very long skinny straw. CAI gives you peak gains and often flat results elsewhere on the power curve. The Password:JDM Dry Carbon PowerChamber delivers real life useable HP all throughout the power band. We spent hours upon hours engineering this PowerChamber so that we deliver to you a true performance product. The dyno result from Erick’s Racing speaks volumes for itself.

Made by PWJDM for PWJDM using our perfected Dry carbon process, this product is one of the finest real carbon pieces you will ever find. Made using 100% aerospace grade epoxy resin with real Hexcel Carbon Fiber or Carbon Kevlar, all of our Password:JDM Dry Carbon products are individually hand crafted here in the States. The beauty about hand crafted Carbon fiber products is they are as unique as a fingerprint; no two carbon items will ever be identical. We deliver our Carbon products in its natural finish. No clearcoat will ever applied by us to hide imperfections or correct blemishes commonly associated with Polyester resin like everyone else in the industry. We strongly believe that this takes away from Carbon Fiber’s distinguished properties and therefore defeats the purpose of using quality materials such as epoxy and real Carbon.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

NOTE: This product is NOT legal for sale, installation, or use on a pollution controlled vehicle in the state of California. This product is NOT CARB legal. Legal only for racing vehicles in closed course competitions which will never be driven on a public right of way. California orders will be canceled and refunded.

Part of modding your car is making it look good and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM dry carbon fiber fuse box over-cover for the 2008-2012 Honda Accord adheres to your stock fuse box cover and will help clean up the look of your engine bay making your engine stand out, while adding a much-needed accent to the scene.

Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it. Note: This fits for all 2008-2012 Accord models sedan or coupe, also including V6

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Canards for the 2009-2011 Honda Civic 2Dr Coupe will generate down-force on the front end to help stabilize your vehicle at high speeds. With the use of a functional front splitter, you can balance the amount of down-force required as per your setup and application per racetrack.

Professional installation recommended.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Canards for the 2012-2015 Honda Civic 2dr coupe will generate down-force on the front end to help stabilize your vehicle at high speeds. With the use of a functional front splitter, you can balance the amount of down-force required as per your setup and application per race track.

Require drilling for installation, professional installation is recommended.   

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash. 

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Password:JDM has done it again! We have crafted these exotic, race inspired, dry carbon coil pack covers to spice up the look of your 2006-2015 Honda Civic NON-Si's engine bay! We all know that the R18 engine does not receive the attention that the Si does and so we decided to step in and help fulfill the dreams of those that want to modify their R18 engines and make it look cool! Like all of our Dry Carbon parts we manufacture, this plug cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this plug cover will always look & function as good as the day you bought it! Fits all 2006+ R18 engine, so both 8th and 9th gen Civics.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your FA 2006-2011 Civic's Sedans operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Fiber Cooling Plate for the 06+ Honda Civic 4dr with the JDM Front End Conversion to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, but you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon version.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Suspension Caps for the 2016-2021 Honda Civic will clean up the look of your engine bay! Like all of our Dry Carbon parts we manufacture, this frame shield has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this engine cover will always look & function as good as the day you bought it! Note: This fits for all 2016-21 Honda Civic models sedan or hatchback, also including the Type R. Also, this part will not allow you to use any strut bar if you have one.

Note: Sold as a pair
Fitment: Fits all 2016-2021 Honda Civic including Type R

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

PasswordJDM Carbon Fiber Center Console for Honda S2000

Give your fully gutted Honda S2000 race car a refined finishing touch with the PasswordJDM Carbon Fiber Center Console. Designed specifically for enthusiasts who prioritize performance while maintaining a clean interior look, this "Race" version console elegantly covers the center pocket area, enhancing both aesthetics and comfort.

Crafted from premium carbon fiber, this center console is lightweight yet durable, offering a race-ready appearance that complements the stripped-down interior of your S2000. By covering the exposed pocket, the console provides a smoother and more comfortable shifting experience, perfect for intense track days or spirited drives.

Features:

• Premium Carbon Fiber Construction: Lightweight, durable, and visually striking.
• Race-Ready Design: Tailored for gutted interiors to provide a sleek and functional finish.
• Enhanced Comfort: Covers the center pocket for smoother, more comfortable shifting.
• Universal Fit for All Years: Compatible with all Honda S2000 model years.
• Customizable Installation: Some modification may be required for the perfect fit.

Upgrade your Honda S2000’s race car interior with the PasswordJDM Carbon Fiber Center Console—the ultimate combination of performance, style, and functionality.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be no returns on painted products

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. Instead, we recommend applying a spray-on wax or ceramic coat to prevent water spots / white marks from appearing after rain or car washing.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Upgrade Your Honda S2000 with Password Carbon Kevlar Fuel Pump Covers!

Give your Honda S2000 a stylish boost with the Password Carbon Kevlar Fuel Pump Covers. These covers are a direct replacement for the stock ones and are perfect for adding a sleek touch to the interior, replacing that plain, exposed look around the fuel pump.

Made from top-quality carbon fiber, these covers not only look great but are also built to last. They feature a UV coating to keep that glossy finish shining bright. Password is known for its precision craftsmanship, with a tight carbon weave that delivers a durable and polished appearance.  Stand out with these unique fuel pump covers, made just for your Honda S2000—only from Password

This application will fit all:
2000-2003 Honda S2000 AP1

2004-2009 Honda S2000 AP2

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Care instructions: Please note that these parts are finished in natural dry carbon fiber. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Password:JDM has done it again! We have crafted these exotic, race inspired, dry carbon kevlar spark plug covers to spice up the look of your engine bay! Like all of our Dry Carbon kevlar parts we manufacture, this plug cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this plug cover will always look & function as good as the day you bought it! Fits any Honda S2000.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

This product is a "B" Stock item. B Stock items may include:

• Scratches
• Excessive Bubbles in weave
• Flaws in finish
• Areas of discoloration
• Excessive Pitting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Are you building a track monster out of your 96-00 Civic? Upgrading your OG cluster to a digital one? When you rip out the OEM cluster there's going to be a lot of space to fill and hold in your new display. Password:JDM's Dry Carbon Cluster Delete helps you fill that void and gives you an area to mount on. Please note, once altered in any way, we cannot accept any Tecnocraft item for return or exchange. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.