Products

The Password:JDM Dry Carbon Kevlar Upper Canards for the 2008+ Mitsubishi Lancer Evolution X will generate down-force on the front end to help stabilize your vehicle at high speeds. With the use of a functional front splitter, you can balance the amount of down-force required as per your setup and application per race track.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Kevlar Lower Canards for the 2012-2014 Subaru WRX STi will generate downforce on the front end to help stabilize your vehicle at high speeds. With the use of a functional front splitter, you can balance the amount of downforce required as per your setup and application per racetrack.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Kevlar Upper Canards for the 2012-2014 Subaru WRX STi will generate down-force on the front end to help stabilize your vehicle at high speeds. With the use of a functional front splitter, you can balance the amount of down-force required as per your setup and application per racetrack.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand-crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Kevlar Canards for the 2013+ Scion FR-S will generate down-force on the front end to help stabilize your vehicle at high speeds. With the use of a functional front splitter, you can balance the amount of down-force required as per your setup and application per racetrack.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Canards for the 1998-2001 Acura Integra Type-R down-force on the front end to help stabilize your vehicle at high speeds. With the use of a functional front splitter, you can balance the amount of down-force required as per your setup and application per race track. The canards are adjustable from 14° to 25° to achieve your required down-force. Positioned at 14°, our canards provide 35 lb+ of down-force at 75 mph.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Introducing the PWJDM Dry Carbon Kevlar Center Console… The PWJDM Dry Carbon Kevlar Center Console is the best there is! Engineered in house for a perfect fit and finish without the use of any hardware, the PWJDM Center Console does volumes for the look of your interior. This item is 100% hand crafted here in the USA. What differentiates the PWJDM Dry Carbon Center Console from just about anything else in the marketplace is that ours is made entire of Dry Carbon Kevlar and wraps around behind the seat for that perfect look. It would have been impossible to make this out of cheaper wet carbon and still maintain this level of fit and finish… This is why PWJDM will only produce in dry carbon Kevlar.

• 100% MADE IN THE USA in house by PASSWORDCOMPOSITES
• 100% Dry carbon Kevlar vacuum formed using Aerospace grade Carbon material and Epoxy Resins
• UV resistant, Will not fade or crack during its lifetime or during installation unlike wet carbon pieces
• NO Hardware required, ultra-light weight, perfect fit and finish
• Installs in 2 hours or less depending on skill level
• Wraps around behind the seats

Attention AP1 S2000 Owners
If you own an AP1 S2000, the Password:JDM Dry Carbon Center Console will fit your vehicle, but you will need to purchase the AP2 S2000 center console cover to cover all trim lines. This may be purchased through your local Honda dealer.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Password:JDM has done it again! We have crafted this exotic, race inspired, dry carbon Kevlar spark plug cover to spice up the look of your engine bay! Like all of our Dry Carbon parts we manufacture, this plug cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this plug cover will always look & function as good as the day you bought it! Fits all 2004+ Scion tC vehicles.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Password:JDM has done it again! We have crafted this exotic, race inspired, dry carbon coil pack covers to spice up the look of your 2006-2015 Honda Civic NON-Si's engine bay! We all know that the R18 engine does not receive the attention that the Si does and so we decided to step in and help fulfill the dreams of those that want to modify their R18 engines and make it look cool! Like all of our Dry Carbon parts we manufacture, this plug cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this plug cover will always look & function as good as the day you bought it! Fits all 2006+ R18 engine, so both 8th and 9th gen Civics.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Password:JDM has done it again! We have crafted this exotic, race inspired, dry carbon spark plug cover to spice up the look of your engine bay! Like all of our Dry Carbon parts we manufacture, this plug cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this plug cover will always look & function as good as the day you bought it! Fits all 2008+ Mitsubishi Lancer Evolution X's.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Password:JDM has done it again! We have crafted this exotic, race inspired, dry Carbon Kevlar coil pack covers to spice up the look of your 2012-2015 Honda Civic Si's engine bay! Like all of our Dry Carbon parts we manufacture, this plug cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this plug cover will always look & function as good as the day you bought it! Fits the K24z7 engine.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Password:JDM has done it again! We have crafted this exotic, race inspired, dry Carbon Kevlar coil pack covers for K-Series to spice up the look of your engine bay! Like all of our Dry Carbon parts we manufacture, this plug cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this plug cover will always look & function as good as the day you bought it! Fits any K-Series equipped Honda vehicle.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your DC2 Integra's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Kevlar Cooling Plate for the 94-01 Honda Integra with JDM Front Ends to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, but you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon version.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your DC2 Integra's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Kevlar Cooling Plate for the 94-01 Honda Integra with USDM Front Ends to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon versions.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your EG Civic's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Kevlar Cooling Plate for the 92-95 Honda Civic to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, but you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon version.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your EK Civic's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Kevlar Cooling Plate for the 96-00 Honda Civic to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon versions.

• Quick 10 minute install
• Super light dry carbon cover
• Includes two Password:JDM Fender Washers for mounting

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your FA 2006-2011 Civic's Sedans operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Kevlar Cooling Plate for the 06+ Honda Civic 4dr with the JDM Front End Conversion to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, but you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon version.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your FA 2006-2011 Civic's Sedans operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Kevlar Cooling Plate for the 06+ Honda Civic 4Dr Sedan to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, but you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon version.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your FG 2006-2011 Civic's Coupes operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Kevlar Cooling Plate for the 06+ Honda Civic 2Dr Coupe to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon versions.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your 2002-2005 EP3 Honda Civic Si's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Kevlar Cooling Plate for the 02-05 Civic Si to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, but you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon version.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your Scion xB operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Kevlar Cooling Plate for the 2004 - 2007 Scion xB to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, but you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon version.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your 2008+ Mitsubishi Lancer Evolution X operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Fiber Cooling Plate for the 2008+ Mitsubishi Lancer Evolution X to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, but you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon version.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your 2008-2014 Subaru WRX's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Kevlar Cooling Plate for the 08-14 Subaru WRX's to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving. This will fit normal WRX and STi models.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, but you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon version.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your 2010-2013 MazdaSpeed 3's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Kevlar Cooling Plate for the 10-13 MazdaSpeed 3 to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your 2012+ Honda Civic Si Coupe's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Kevlar Cooling Plate for the 2012+ Honda Civic Si Coupe to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, but you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon version.

Please note that this fits any 2012 and 2013 Honda Civic 2dr Coupe and only the 2012 Honda Civic 4dr Sedan.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your 2013-2015 Honda Civic Sedan's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Kevlar Cooling Plate for the 2013+ Honda Civic Si Sedan to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, but you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon version.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your 2014-2015 Honda Civic Coupe's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Kevlar Cooling Plate for the 2014+ Honda Civic Si Coupe to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, but you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon version.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your 2013-2020 Subaru BRZ / Scion FR-S operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Kevlar Cooling Plate for the 2013-2020 Subaru BRZ / Scion FR-S to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, but you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear-coated carbon version.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your DC2 Integra's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Fiber Cooling Plate for the 94-01 Honda Integra with USDM Front Ends to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

NOTE: Some trimming may be required around the filler neck with aftermarket radiators.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, but you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light, often more than twice as light as a clear coated carbon version.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your S2000's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Kevlar Cooling Plate for the Honda S2000 to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Not only will you gain cooling efficiency with the PWJDM radiator cooling plate, but you will also clean up your cluttered engine bay. Unlike the other cooling plates out there, ours is super light (230 grams!), often more than twice as light as a clear-coated carbon version.

This version of the cooling plate is perfect for S2000's running the stock airbox, turbo kit, or AEM/Injen style intake systems.

• Quick 10-minute install
• Super light dry carbon cover

Please note that we highly recommend you to purchase this with our Passwordjdm Fender Washer Kit as we have found that the OEM hardware does not install very well with our cooling plate.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

A stock engine bay is lame. Your S2000 deserves better, and the best way to treat it right is to dress it up with this kick-ass radiator cover. Unlike the other covers out there, the Password:JDM Dry Carbon Kevlar Cooling Plate for the Honda S2000 is super light, often more than twice as light as a clear-coated carbon cover.

• Quick 10-minute install
• Super light dry carbon/kevlar cover

Please note that we highly recommend you to purchase this with our Passwordjdm Fender Washer Kit as we have found that the OEM hardware does not install very well with our cooling plate.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The cooling system is a vital component of your Prelude's operation. The radiator needs constant airflow, with minimum turbulence, to be as efficient as possible. Unfortunately, gaps in the structure around the radiator allow air to escape, resulting in lost efficiency. We have designed the Password:JDM Dry Carbon Fiber Cooling Plate for the 97-01 Honda Prelude to eliminate this problem. By preventing air to escape over the top of the radiator, these cooling plates allow a maximum amount of airflow directly to your radiator, resulting in reduced coolant temperatures during aggressive driving.

Note: This will only work on aftermarket radiators.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good, and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM dry Carbon Kevlar Distributor Cover for Honda B-Series Engines will help clean up the look of your engine bay making your engine bay stand out, adding a race inspired look to your engine.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM dry Carbon Kevlar Distributor Cover for Honda H-Series Engines will help clean up the look of your engine bay making your engine bay stand out, adding a race inspired look to your engine.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood.

The Password:JDM dry Carbon Kevlar ECU over-cover for the 2006-2011 Honda Civic adheres to your stock ECU and will help clean up the look of your engine bay making your engine stand out, while adding a much-needed accent to the scene.

Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it.

Note: The Password:JDM Dry Carbon Kevlar ECU Over Cover fits over the factory part and is adhered with double side tape.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Part of modding your car is making it look good and looks weren't really a concern when the engineers were designing your ride. It's easy to see that when you open up the hood and it easily looks like a rat's nest. Password knows that looks on the outside don't mean squat if you can't show off what's under the hood. The Password:JDM dry Carbon Kevlar ECU over-cover for the 2012-2015 Honda Civic adheres to your stock ECU and will help clean up the look of your engine bay making your engine stand out, while adding a much-needed accent to the scene. Like all of our dry carbon fiber parts that we manufacture, this piece has been precision crafted for a perfect fit and requires no tools or modifications to install. We also use a fade-resistant resin during the manufacturing process which ensures that the part will look as fresh as it did and function as well as the day you bought it.

Note: The Password:JDM Dry Carbon Fiber ECU Over Cover fits over the factory part and is adhered with double side tape.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Compartment Covers for your +09 370Z is an excellent way to clean up the look of your engine bay. These are the 1st versions of the compartment covers, they have a sleek and smooth finish on top.  The compartment covers are a great way to improve your engine bay look if you are interested in propping your head up at your local meets. Install is quick and easy, as they are a direct fit. 

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Made of Dry Carbon Kevlar, the Password:JDM Engine Compartment Covers fits perfectly. We redesigned these pieces, and they have a new "Z" shaped design on both sides. We also took the time to delete the access doors since removing these for access really only takes 30 secs. The initial installation takes only 5 mins and requires absolutely no cutting or drilling at all. These lightweight and rigid Password:JDM Dry Carbon Kevlar Engine Compartment Covers will set off your engine bay perfectly!

- Perfect mod for the engine bay
- Dry CF construction
- Made in the USA
- Perfect fit and finish
- Easy install, no cutting or drilling required

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Kevlar Engine Cover for the 2004-2007 Scion xB will spice up the look of your engine bay! Like all of our Dry Carbon parts we manufacture, this engine cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this engine cover will always look & function as good as the day you bought it!

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Kevlar Engine Cover for the 2004-2010 Scion tC will spice up the look of your engine bay! Like all of our Dry Carbon parts we manufacture, this engine cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this engine cover will always look & function as good as the day you bought it!

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Password:JDM has done it again! We have crafted this exotic, race inspired, dry Carbon Kevlar engine cover to spice up the look of your 2006-2015 Honda Civic NON-Si's engine bay! We all know that the R18 engine does not receive the attention that the Si does and so we decided to step in and help fulfill the dreams of those that want to modify their R18 engines and make it look cool! Like all of our Dry Carbon parts we manufacture, this plug cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this plug cover will always look & function as good as the day you bought it! Fits all 2006+ R18 engine, so both 8th and 9th gen Civics.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Kevlar Engine Cover for the 2008+ Mitsubishi Lancer Evolution X will spice up the look of your engine bay! Like all of our Dry Carbon parts we manufacture, this intake manifold cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this plug cover will always look & function as good as the day you bought it!

PLEASE NOTE RE-ROUTING OF WIRING REQUIRED FOR 2011+ EVO MODELS.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Engine Cover for the 2008 - 2014 Subaru WRX. By using an organic flowing design, our carbon engine cover will give your bay a very unique look unmatched by any other product on the market. Please note that this fits only the WRX (non-STi) engine.

Like all of our Dry Carbon Fiber parts we manufacture, this engine cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this cover will always look & function as good as the day you bought it!

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.